Drop this old pre-driver model code.
Signed-off-by: Simon Glass sjg@chromium.org ---
board/freescale/common/cds_pci_ft.c | 59 ---------- board/freescale/common/p_corenet/Makefile | 1 - board/freescale/common/p_corenet/pci.c | 25 ----- board/freescale/mpc8548cds/mpc8548cds.c | 114 -------------------- board/freescale/p1010rdb/p1010rdb.c | 11 -- board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 11 -- board/freescale/t102xrdb/Makefile | 1 - board/freescale/t102xrdb/pci.c | 25 ----- board/freescale/t104xrdb/Makefile | 1 - board/freescale/t104xrdb/pci.c | 25 ----- board/freescale/t208xqds/Makefile | 1 - board/freescale/t208xqds/pci.c | 25 ----- board/freescale/t208xrdb/Makefile | 1 - board/freescale/t208xrdb/pci.c | 25 ----- board/freescale/t4rdb/Makefile | 1 - board/freescale/t4rdb/pci.c | 25 ----- 16 files changed, 351 deletions(-) delete mode 100644 board/freescale/common/p_corenet/pci.c delete mode 100644 board/freescale/t102xrdb/pci.c delete mode 100644 board/freescale/t104xrdb/pci.c delete mode 100644 board/freescale/t208xqds/pci.c delete mode 100644 board/freescale/t208xrdb/pci.c delete mode 100644 board/freescale/t4rdb/pci.c
diff --git a/board/freescale/common/cds_pci_ft.c b/board/freescale/common/cds_pci_ft.c index be97a28ed25..dc2d62850d1 100644 --- a/board/freescale/common/cds_pci_ft.c +++ b/board/freescale/common/cds_pci_ft.c @@ -9,68 +9,9 @@ #include "cadmus.h"
#if defined(CONFIG_OF_BOARD_SETUP) -#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI) -static void cds_pci_fixup(void *blob) -{ - int node; - const char *path; - int len, slot, i; - u32 *map = NULL, *piccells = NULL; - int off, cells; - - node = fdt_path_offset(blob, "/aliases"); - if (node >= 0) { - path = fdt_getprop(blob, node, "pci0", NULL); - if (path) { - node = fdt_path_offset(blob, path); - if (node >= 0) { - map = fdt_getprop_w(blob, node, "interrupt-map", &len); - } - /* Each item in "interrupt-map" property is translated with - * following cells: - * PCI #address-cells, PCI #interrupt-cells, - * PIC address, PIC #address-cells, PIC #interrupt-cells. - */ - cells = fdt_getprop_u32_default(blob, path, "#address-cells", 1); - cells += fdt_getprop_u32_default(blob, path, "#interrupt-cells", 1); - off = fdt_node_offset_by_phandle(blob, fdt32_to_cpu(*(map+cells))); - if (off <= 0) - return; - cells += 1; - piccells = (u32 *)fdt_getprop(blob, off, "#address-cells", NULL); - if (piccells == NULL) - return; - cells += *piccells; - piccells = (u32 *)fdt_getprop(blob, off, "#interrupt-cells", NULL); - if (piccells == NULL) - return; - cells += *piccells; - } - } - - if (map) { - len /= sizeof(u32); - - slot = get_pci_slot(); - - for (i=0;i<len;i+=cells) { - /* We rotate the interrupt pins so that the mapping - * changes depending on the slot the carrier card is in. - */ - map[3] = ((map[3] + slot - 2) % 4) + 1; - map+=cells; - } - } -} -#endif - int ft_board_setup(void *blob, struct bd_info *bd) { ft_cpu_setup(blob, bd); -#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI) - ft_pci_setup(blob, bd); - cds_pci_fixup(blob); -#endif
return 0; } diff --git a/board/freescale/common/p_corenet/Makefile b/board/freescale/common/p_corenet/Makefile index 29c9d544ae5..ce156018a06 100644 --- a/board/freescale/common/p_corenet/Makefile +++ b/board/freescale/common/p_corenet/Makefile @@ -4,5 +4,4 @@ # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += law.o -obj-$(CONFIG_PCI) += pci.o obj-y += tlb.o diff --git a/board/freescale/common/p_corenet/pci.c b/board/freescale/common/p_corenet/pci.c deleted file mode 100644 index 636334863e1..00000000000 --- a/board/freescale/common/p_corenet/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2011 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index a1a9742bfa4..cfb5b0b38bb 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -168,113 +168,6 @@ void lbc_sdram_init(void) #endif /* enable SDRAM init */ }
-#if (defined(CONFIG_PCI) || defined(CONFIG_PCI1)) && !defined(CONFIG_DM_PCI) -/* For some reason the Tundra PCI bridge shows up on itself as a - * different device. Work around that by refusing to configure it. - */ -void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { } - -static struct pci_config_table pci_mpc85xxcds_config_table[] = { - {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, - mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, - mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, - mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, - mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, - mpc85xx_config_via_ac97, {0,0,0}}, - {}, -}; - -static struct pci_controller pci1_hose; -#endif /* CONFIG_PCI */ - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - struct fsl_pci_info pci_info; - u32 devdisr, pordevsr, io_sel; - u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel; - int first_free_busno = 0; - char buf[32]; - - devdisr = in_be32(&gur->devdisr); - pordevsr = in_be32(&gur->pordevsr); - porpllsr = in_be32(&gur->porpllsr); - io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19; - - debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel); - -#ifdef CONFIG_PCI1 - pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ - pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ - pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; - pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; - - if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { - SET_STD_PCI_INFO(pci_info, 1); - set_next_law(pci_info.mem_phys, - law_size_bits(pci_info.mem_size), pci_info.law); - set_next_law(pci_info.io_phys, - law_size_bits(pci_info.io_size), pci_info.law); - - pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs); - printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n", - (pci_32) ? 32 : 64, - strmhz(buf, pci_speed), - pci_clk_sel ? "sync" : "async", - pci_agent ? "agent" : "host", - pci_arb ? "arbiter" : "external-arbiter", - pci_info.regs); - - pci1_hose.config_table = pci_mpc85xxcds_config_table; - first_free_busno = fsl_pci_init_port(&pci_info, - &pci1_hose, first_free_busno); - -#ifdef CONFIG_PCIX_CHECK - if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) { - /* PCI-X init */ - if (CONFIG_SYS_CLK_FREQ < 66000000) - printf("PCI-X will only work at 66 MHz\n"); - - reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ - | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E; - pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16); - } -#endif - } else { - printf("PCI1: disabled\n"); - } - - puts("\n"); -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */ -#endif - -#ifdef CONFIG_PCI2 -{ - uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */ - uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ - if (pci_dual) { - printf("PCI2: 32 bit, 66 MHz, %s\n", - pci2_clk_sel ? "sync" : "async"); - } else { - printf("PCI2: disabled\n"); - } -} -#else - setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */ -#endif /* CONFIG_PCI2 */ - - fsl_pcie_init_board(first_free_busno); -} -#endif - void configure_rgmii(void) { unsigned short temp; @@ -354,10 +247,3 @@ int board_eth_init(struct bd_info *bis)
return pci_eth_init(bis); } - -#if defined(CONFIG_OF_BOARD_SETUP) && !defined(CONFIG_DM_PCI) -void ft_pci_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 90436337df1..84fc891b67c 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -129,13 +129,6 @@ int board_early_init_r(void) return 0; }
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif /* ifdef CONFIG_PCI */ - int config_board_mux(int ctrl_type) { ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -617,10 +610,6 @@ int ft_board_setup(void *blob, struct bd_info *bd) base = env_get_bootm_low(); size = env_get_bootm_size();
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI) - FT_FSL_PCI_SETUP; -#endif - fdt_fixup_memory(blob, (u64)base, (u64)size);
#if defined(CONFIG_HAS_FSL_DR_USB) diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 8273384f2d5..fb9bf795e30 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -239,13 +239,6 @@ int checkboard(void) return 0; }
-#if defined(CONFIG_PCI) && !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - int board_early_init_r(void) { const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; @@ -363,10 +356,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
fdt_fixup_memory(blob, (u64)base, (u64)size);
-#if !defined(CONFIG_DM_PCI) - FT_FSL_PCI_SETUP; -#endif - #ifdef CONFIG_QE do_fixup_by_compat(blob, "fsl,qe", "status", "okay", sizeof("okay"), 0); diff --git a/board/freescale/t102xrdb/Makefile b/board/freescale/t102xrdb/Makefile index ddeb44f36e2..e597486c940 100644 --- a/board/freescale/t102xrdb/Makefile +++ b/board/freescale/t102xrdb/Makefile @@ -10,7 +10,6 @@ else obj-y += t102xrdb.o obj-$(CONFIG_TARGET_T1024RDB) += cpld.o obj-y += eth_t102xrdb.o -obj-$(CONFIG_PCI) += pci.o endif obj-y += ddr.o obj-y += law.o diff --git a/board/freescale/t102xrdb/pci.c b/board/freescale/t102xrdb/pci.c deleted file mode 100644 index 45ab9223ae1..00000000000 --- a/board/freescale/t102xrdb/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/t104xrdb/Makefile b/board/freescale/t104xrdb/Makefile index 31abbd9aca0..d67e9412ecd 100644 --- a/board/freescale/t104xrdb/Makefile +++ b/board/freescale/t104xrdb/Makefile @@ -8,7 +8,6 @@ else obj-y += t104xrdb.o obj-y += cpld.o obj-y += eth.o -obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_FSL_DIU_FB)+= diu.o endif obj-y += ddr.o diff --git a/board/freescale/t104xrdb/pci.c b/board/freescale/t104xrdb/pci.c deleted file mode 100644 index 1fd24027000..00000000000 --- a/board/freescale/t104xrdb/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile index 55b1e7390a0..de8613058de 100644 --- a/board/freescale/t208xqds/Makefile +++ b/board/freescale/t208xqds/Makefile @@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD obj-y += spl.o else obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o -obj-$(CONFIG_PCI) += pci.o endif
obj-y += ddr.o diff --git a/board/freescale/t208xqds/pci.c b/board/freescale/t208xqds/pci.c deleted file mode 100644 index a03b11ccb50..00000000000 --- a/board/freescale/t208xqds/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2013 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/t208xrdb/Makefile b/board/freescale/t208xrdb/Makefile index 25ea66a0248..7af3cd0ac4c 100644 --- a/board/freescale/t208xrdb/Makefile +++ b/board/freescale/t208xrdb/Makefile @@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD obj-y += spl.o else obj-$(CONFIG_TARGET_T2080RDB) += t208xrdb.o eth_t208xrdb.o cpld.o -obj-$(CONFIG_PCI) += pci.o endif
obj-y += ddr.o diff --git a/board/freescale/t208xrdb/pci.c b/board/freescale/t208xrdb/pci.c deleted file mode 100644 index 45ab9223ae1..00000000000 --- a/board/freescale/t208xrdb/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2007-2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile index f1fd623339c..3106848639c 100644 --- a/board/freescale/t4rdb/Makefile +++ b/board/freescale/t4rdb/Makefile @@ -10,7 +10,6 @@ else obj-$(CONFIG_TARGET_T4240RDB) += t4240rdb.o obj-y += cpld.o obj-y += eth.o -obj-$(CONFIG_PCI) += pci.o endif
obj-y += ddr.o diff --git a/board/freescale/t4rdb/pci.c b/board/freescale/t4rdb/pci.c deleted file mode 100644 index c2bc05164dd..00000000000 --- a/board/freescale/t4rdb/pci.c +++ /dev/null @@ -1,25 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2014 Freescale Semiconductor, Inc. - */ - -#include <common.h> -#include <command.h> -#include <init.h> -#include <pci.h> -#include <asm/fsl_pci.h> -#include <linux/libfdt.h> -#include <fdt_support.h> -#include <asm/fsl_serdes.h> - -#if !defined(CONFIG_DM_PCI) -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} - -void pci_of_setup(void *blob, struct bd_info *bd) -{ - FT_FSL_PCI_SETUP; -} -#endif