The existing work-around for positioning U-Boot in the ROM when it actually runs from RAM still exists and there is not obvious way to change this.
Add a proper Kconfig option to handle this case. This also adds a new bool property to indicate whether CONFIG_SYS_TEXT_BASE exists.
Signed-off-by: Simon Glass sjg@chromium.org ---
Changes in v4: - Rename option to HAVE_SYS_TEXT_BASE
Changes in v3: None Changes in v2: None
Kconfig | 9 ++++++--- arch/x86/Kconfig | 5 +++++ arch/x86/dts/u-boot.dtsi | 18 +++--------------- configs/chromebook_samus_tpl_defconfig | 1 + 4 files changed, 15 insertions(+), 18 deletions(-)
diff --git a/Kconfig b/Kconfig index cda4f58ff7..85e0eb642c 100644 --- a/Kconfig +++ b/Kconfig @@ -544,9 +544,14 @@ config SYS_EXTRA_OPTIONS configuration to Kconfig. Since this option will be removed sometime, new boards should not use this option.
-config SYS_TEXT_BASE +config HAVE_SYS_TEXT_BASE + bool depends on !NIOS2 && !XTENSA depends on !EFI_APP + default y + +config SYS_TEXT_BASE + depends on HAVE_SYS_TEXT_BASE default 0x80800000 if ARCH_OMAP2PLUS || ARCH_K3 default 0x4a000000 if ARCH_SUNXI && !MACH_SUN9I && !MACH_SUN8I_V3S default 0x2a000000 if ARCH_SUNXI && MACH_SUN9I @@ -555,8 +560,6 @@ config SYS_TEXT_BASE help The address in memory that U-Boot will be running from, initially.
- - config SYS_CLK_FREQ depends on ARC || ARCH_SUNXI || MPC83xx int "CPU clock frequency" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index a1c5f5526c..e105fda2f2 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -899,4 +899,9 @@ config CACHE_QOS_SIZE_PER_BIT depends on INTEL_CAR_CQOS default 0x20000 # 128 KB
+config X86_OFFSET_U_BOOT + hex "Offset of U-Boot in ROM image" + depends on HAVE_SYS_TEXT_BASE + default SYS_TEXT_BASE + endmenu diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi index 14e3c13072..d84c64880a 100644 --- a/arch/x86/dts/u-boot.dtsi +++ b/arch/x86/dts/u-boot.dtsi @@ -50,7 +50,7 @@ u-boot-spl-dtb { }; u-boot { - offset = <CONFIG_SYS_TEXT_BASE>; + offset = <CONFIG_X86_OFFSET_U_BOOT>; }; #elif defined(CONFIG_SPL) u-boot-spl-with-ucode-ptr { @@ -60,23 +60,11 @@ type = "u-boot-dtb-with-ucode"; }; u-boot { - /* - * TODO(sjg@chromium.org): - * Normally we use CONFIG_SYS_TEXT_BASE as the flash offset. But - * for boards with textbase in SDRAM we cannot do this. Just use - * an assumed-valid value (1MB before the end of flash) here so - * that we can actually build an image for coreboot, etc. - * We need a better solution, perhaps a separate Kconfig. - */ -#if CONFIG_SYS_TEXT_BASE == 0x1110000 - offset = <0xfff00000>; -#else - offset = <CONFIG_SYS_TEXT_BASE>; -#endif + offset = <CONFIG_X86_OFFSET_U_BOOT>; }; #else u-boot-with-ucode-ptr { - offset = <CONFIG_SYS_TEXT_BASE>; + offset = <CONFIG_X86_OFFSET_U_BOOT>; }; #endif #ifdef CONFIG_HAVE_MICROCODE diff --git a/configs/chromebook_samus_tpl_defconfig b/configs/chromebook_samus_tpl_defconfig index 28f23cfe12..c7f125eaa4 100644 --- a/configs/chromebook_samus_tpl_defconfig +++ b/configs/chromebook_samus_tpl_defconfig @@ -13,6 +13,7 @@ CONFIG_HAVE_REFCODE=y CONFIG_SMP=y CONFIG_HAVE_VGA_BIOS=y CONFIG_SPL_TEXT_BASE=0xffe70000 +CONFIG_X86_OFFSET_U_BOOT=0xfff00000 CONFIG_BOOTSTAGE=y CONFIG_BOOTSTAGE_REPORT=y CONFIG_SHOW_BOOT_PROGRESS=y