From: Dinesh Maniyam dinesh.maniyam@intel.com
The freeze controller is required for FPGA partial reconfig. This node is disable on default. Enable this node via u-boot fdt command when needed.
Signed-off-by: Yau Wai Gan yau.wai.gan@intel.com Signed-off-by: Dinesh Maniyam dinesh.maniyam@intel.com --- arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi index 61df425f14..75a29045da 100755 --- a/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi +++ b/arch/arm/dts/socfpga_stratix10_socdk-u-boot.dtsi @@ -2,7 +2,7 @@ /* * U-Boot additions * - * Copyright (C) 2019-2020 Intel Corporation <www.intel.com> + * Copyright (C) 2019-2022 Intel Corporation <www.intel.com> */
#include "socfpga_stratix10-u-boot.dtsi" @@ -10,6 +10,15 @@ /{ aliases { spi0 = &qspi; + freeze_br0 = &freeze_controller; + }; + + soc { + freeze_controller: freeze_controller@f9000450 { + compatible = "altr,freeze-bridge-controller"; + reg = <0xf9000450 0x00000010>; + status = "disabled"; + }; }; };