This adds a generic I2C bootcounter adhering to driver model to replace the previously removed legacy implementation.
There is no change in functionality, it can be used on any I2C device. The device tree configuration may look like this for example:
bootcount { compatible = "u-boot,bootcount-i2c"; i2c-bus = <&i2c1>; address = <0x52>; offset = <0x11>; };
Signed-off-by: Philip Richard Oberfichtner pro@denx.de --- drivers/bootcount/Kconfig | 10 +++ drivers/bootcount/Makefile | 1 + drivers/bootcount/bootcount_dm_i2c.c | 126 +++++++++++++++++++++++++++ 3 files changed, 137 insertions(+) create mode 100644 drivers/bootcount/bootcount_dm_i2c.c
diff --git a/drivers/bootcount/Kconfig b/drivers/bootcount/Kconfig index 7a2548ace2..1cf1de2b6d 100644 --- a/drivers/bootcount/Kconfig +++ b/drivers/bootcount/Kconfig @@ -109,6 +109,16 @@ config DM_BOOTCOUNT_RTC Accesses to the backing store are performed using the write16 and read16 ops of DM RTC devices.
+config DM_BOOTCOUNT_I2C + bool "Driver Model boot counter on I2C device" + depends on DM_I2C + help + Enable support for the bootcounter on a generic i2c device, like a + RTC or PMIC. This requires an 'i2c-bus', the i2c chip 'address' and + the 'offset' to read to and write from. All of the three settings are + defined as device tree properties using the "u-boot,bootcount-i2c" + compatible string. + config DM_BOOTCOUNT_I2C_EEPROM bool "Support i2c eeprom devices as a backing store for bootcount" depends on I2C_EEPROM diff --git a/drivers/bootcount/Makefile b/drivers/bootcount/Makefile index d6d2389c16..e7771f5b36 100644 --- a/drivers/bootcount/Makefile +++ b/drivers/bootcount/Makefile @@ -13,5 +13,6 @@ obj-$(CONFIG_DM_BOOTCOUNT) += bootcount-uclass.o obj-$(CONFIG_DM_BOOTCOUNT_PMIC_PFUZE100) += pmic_pfuze100.o obj-$(CONFIG_DM_BOOTCOUNT_RTC) += rtc.o obj-$(CONFIG_DM_BOOTCOUNT_I2C_EEPROM) += i2c-eeprom.o +obj-$(CONFIG_DM_BOOTCOUNT_I2C) += bootcount_dm_i2c.o obj-$(CONFIG_DM_BOOTCOUNT_SPI_FLASH) += spi-flash.o obj-$(CONFIG_DM_BOOTCOUNT_SYSCON) += bootcount_syscon.o diff --git a/drivers/bootcount/bootcount_dm_i2c.c b/drivers/bootcount/bootcount_dm_i2c.c new file mode 100644 index 0000000000..227641f77e --- /dev/null +++ b/drivers/bootcount/bootcount_dm_i2c.c @@ -0,0 +1,126 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * (C) Copyright 2023 + * Philip Richard Oberfichtner pro@denx.de + * + * Based on previous work from Heiko Schocher (legacy bootcount_i2c.c driver) + */ + +#include <bootcount.h> +#include <common.h> +#include <dm.h> +#include <i2c.h> + +#define BC_MAGIC 0x55 + +struct bootcount_i2c_priv { + struct udevice *chip; + unsigned int offset; +}; + +static int bootcount_i2c_set(struct udevice *dev, const u32 val) +{ + int ret; + struct bootcount_i2c_priv *priv = dev_get_priv(dev); + + ret = dm_i2c_reg_write(priv->chip, priv->offset, BC_MAGIC); + if (ret < 0) + goto err_exit; + + ret = dm_i2c_reg_write(priv->chip, priv->offset + 1, val & 0xff); + if (ret < 0) + goto err_exit; + + return 0; + +err_exit: + log_debug("%s: Error writing to I2C device (%d)\n", __func__, ret); + return ret; +} + +static int bootcount_i2c_get(struct udevice *dev, u32 *val) +{ + int ret; + struct bootcount_i2c_priv *priv = dev_get_priv(dev); + + ret = dm_i2c_reg_read(priv->chip, priv->offset); + if (ret < 0) + goto err_exit; + + if ((ret & 0xff) != BC_MAGIC) { + log_debug("%s: Invalid Magic, reset bootcounter.\n", __func__); + *val = 0; + return bootcount_i2c_set(dev, 0); + } + + ret = dm_i2c_reg_read(priv->chip, priv->offset + 1); + if (ret < 0) + goto err_exit; + + *val = ret; + return 0; + +err_exit: + log_debug("%s: Error reading from I2C device (%d)\n", __func__, ret); + return ret; +} + +static int bootcount_i2c_probe(struct udevice *dev) +{ + struct bootcount_i2c_priv *priv = dev_get_priv(dev); + struct ofnode_phandle_args phandle_args; + struct udevice *bus; + unsigned int addr; + int ret; + + ret = dev_read_u32(dev, "offset", &priv->offset); + if (ret) { + log_debug("%s: Unable to get offset\n", __func__); + return ret; + } + + ret = dev_read_u32(dev, "address", &addr); + if (ret) { + log_debug("%s: Unable to get chip address\n", __func__); + return ret; + } + + ret = dev_read_phandle_with_args(dev, "i2c-bus", NULL, 0, 0, &phandle_args); + if (ret) { + log_debug("%s: Unable to get phandle\n", __func__); + return ret; + } + + ret = uclass_get_device_by_ofnode(UCLASS_I2C, phandle_args.node, &bus); + if (ret) { + log_debug("%s: Unable to get i2c bus\n", __func__); + return ret; + } + + ret = i2c_get_chip(bus, addr, 1, &priv->chip); + if (ret) { + log_debug("%s: Unable to get i2c chip\n", __func__); + return ret; + } + + return 0; +} + +static const struct bootcount_ops bootcount_i2c_ops = { + .get = bootcount_i2c_get, + .set = bootcount_i2c_set, +}; + +static const struct udevice_id bootcount_i2c_ids[] = { + { .compatible = "u-boot,bootcount-i2c" }, + { } +}; + +U_BOOT_DRIVER(bootcount_i2c) = { + .name = "bootcount-i2c", + .id = UCLASS_BOOTCOUNT, + .priv_auto = sizeof(struct bootcount_i2c_priv), + .probe = bootcount_i2c_probe, + .of_match = bootcount_i2c_ids, + .ops = &bootcount_i2c_ops, +};