Re: [U-Boot] [PATCH 1/2] at91: Add CAN init function

On 08:09 Tue 30 Jun , Daniel Gorsulowski wrote:

To enable CAN init, CONFIG_CAN has to be defined in the board config file and at91_can_hw_init() has to be called in the board specific code.

CAN is available on AT91SAM9263 and AT91CAP9 SoC.

Signed-off-by: Daniel Gorsulowski Daniel.Gorsulowski@esd.eu

cpu/arm926ejs/at91/at91cap9_devices.c | 15 +++++++++++++++ cpu/arm926ejs/at91/at91sam9263_devices.c | 15 +++++++++++++++ include/asm-arm/arch-at91/at91_common.h | 1 + 3 files changed, 31 insertions(+), 0 deletions(-)

Applied to u-boot-arm

Best Regards, J.