This allows building the SPL without driver model for USB. Since CONFIG_SPL_DM_USB is enabled if and only if CONFIG_DM_USB was enabled before, this patch does not change the build behaviour.
Signed-off-by: Sven Schwermer sven@svenschwermer.de --- drivers/usb/Kconfig | 5 +++++ drivers/usb/common/Makefile | 2 +- drivers/usb/host/Makefile | 2 +- 3 files changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 4fbe172e05..03746dd12f 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -47,6 +47,11 @@ config DM_USB declared with the U_BOOT_USB_DEVICE() macro and will be automatically probed when found on the bus.
+config SPL_DM_USB + bool "Enable driver model for USB in SPL" + depends on DM_USB + default y + source "drivers/usb/host/Kconfig"
source "drivers/usb/dwc3/Kconfig" diff --git a/drivers/usb/common/Makefile b/drivers/usb/common/Makefile index 55e0547b16..3bedbf213f 100644 --- a/drivers/usb/common/Makefile +++ b/drivers/usb/common/Makefile @@ -3,6 +3,6 @@ # (C) Copyright 2016 Freescale Semiconductor, Inc. #
-obj-$(CONFIG_DM_USB) += common.o +obj-$(CONFIG_$(SPL_)DM_USB) += common.o obj-$(CONFIG_USB_EHCI_FSL) += fsl-dt-fixup.o fsl-errata.o obj-$(CONFIG_USB_XHCI_FSL) += fsl-dt-fixup.o fsl-errata.o diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index cb8c315a15..bfa565c4c3 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -3,7 +3,7 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifdef CONFIG_DM_USB +ifdef CONFIG_$(SPL_)DM_USB obj-$(CONFIG_CMD_USB) += usb-uclass.o obj-$(CONFIG_SANDBOX) += usb-sandbox.o endif