-----Original Message----- From: U-Boot u-boot-bounces@lists.denx.de On Behalf Of Kuldeep Singh Sent: Wednesday, March 18, 2020 11:57 AM To: Priyanka Jain priyanka.jain@nxp.com; u-boot@lists.denx.de Cc: Kuldeep Singh kuldeep.singh@nxp.com Subject: [Patch v3 2/2] configs: ls2080ardb: Make BOOT command access flash memory as per spi-mem
BOOT command currently access spi-nor flash memory directly. As per spi- mem framework, flash memory access via absolute addresses is no more possible. Use flash APIs to access memory instead of directly using it.
Signed-off-by: Kuldeep Singh kuldeep.singh@nxp.com
v3: -Rebase
v2: -Rebase to top -Reword commit message
include/configs/ls2080ardb.h | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index d36e928..b8e5dd3 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -508,10 +508,13 @@ unsigned long get_board_sys_clk(void);
#ifdef CONFIG_TFABOOT #define QSPI_NOR_BOOTCOMMAND \
"sf probe 0:0; " \"sf read 0x806c0000 0x6c0000 0x40000; "
"&& esbc_validate 0x206C0000; "
"&& esbc_validate 0x806c0000; ""sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \
"fsl_mc lazyapply dpl 0x20d00000; " \
"fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run qspi_bootcmd; "@@ -538,10 +541,13 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_QSPI_BOOT /* Try to boot an on-QSPI kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND \
"sf probe 0:0; " \"sf read 0x806c0000 0x6c0000 0x40000; "
"&& esbc_validate 0x206C0000; "
"&& esbc_validate 0x806C0000; ""sf read 0x80d00000 0xd00000 0x100000; " \ "env exists mcinitcmd && " \
"fsl_mc lazyapply dpl 0x20d00000; " \
"fsl_mc lazyapply dpl 0x80d00000; " \ "run distro_bootcmd;run qspi_bootcmd; "#elif defined(CONFIG_SD_BOOT)
2.7.4
Same comment as previous, please provide testing status for both secure and non-secure boot
Regards Priyanka