Hi Joel,
On 11.01.20 22:07, Joel Johnson wrote:
I've found an issue in testing with the ENV_IS_IN_X values, they need to be changed from a "select" to an "imply" to enable disabling default values and support booting from MMC and having flash in SPI (or the other way around).
I have the change queued for either a second patch submission (pending additional review and comments), or subsequent patch.
As you will most likely rebase your patches on top of Baruch's patches, please change this patch to using "imply" then.
Thanks, Stefan
Joel
On 2020-01-11 12:36, Joel Johnson wrote:
With the move to driver model usage, ensure that the required driver support for SPI and MMC booting is available in SPL.
Tested on SolidRun ClearFog devices.
Signed-off-by: Joel Johnson mrjoel@lixil.net
arch/arm/mach-mvebu/Kconfig | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index c6a1a0a944..b3239b2b01 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -234,9 +234,19 @@ choice
config MVEBU_SPL_BOOT_DEVICE_SPI bool "SPI NOR flash"
select ENV_IS_IN_SPI_FLASH
select SPL_DM_SPI
select SPL_MTD_SUPPORT
select SPL_SPI_FLASH_SUPPORT
select SPL_SPI_LOAD
select SPL_SPI_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_MMC bool "SDIO/MMC card"
select ENV_IS_IN_MMC
# GPIO required for SD card presence detection line
select SPL_DM_GPIO
select SPL_DM_MMC select SPL_LIBDISK_SUPPORT
config MVEBU_SPL_BOOT_DEVICE_SATA
Viele Grüße, Stefan