Re: [U-Boot] [PATCH] x86: baytrail: Configure FSP UPD from device tree

Hi Andrew,

On Mon, Jun 29, 2015 at 11:10 PM, andrew@bradfordembedded.com wrote:

From: Andrew Bradford andrew.bradford@kodakalaris.com

Allow for configuration of FSP UPD from the device tree which will override any settings which the FSP was built with itself if the device tree settings exist, otherwise simply trust the FSP's defaults.

Modifies the MinnowMax board to transfer the FSP UPD hard-coded settings to the MinnowMax dts.

Signed-off-by: Andrew Bradford andrew.bradford@kodakalaris.com

arch/x86/cpu/baytrail/fsp_configs.c | 183 +++++++++++++++++---- arch/x86/dts/minnowmax.dts | 27 +++ .../misc/intel,baytrail-fsp.txt | 113 +++++++++++++ include/fdtdec.h | 1 + lib/fdtdec.c | 1 + 5 files changed, 295 insertions(+), 30 deletions(-) create mode 100644 doc/device-tree-bindings/misc/intel,baytrail-fsp.txt

diff --git a/arch/x86/cpu/baytrail/fsp_configs.c b/arch/x86/cpu/baytrail/fsp_configs.c index 86b6926..fd07eca 100644 --- a/arch/x86/cpu/baytrail/fsp_configs.c +++ b/arch/x86/cpu/baytrail/fsp_configs.c @@ -1,11 +1,13 @@ /*

• Copyright (C) 2013, Intel Corporation
• Copyright (C) 2014, Bin Meng bmeng.cn@gmail.com

• • Copyright (C) 2015, Kodak Alaris
  • SPDX-License-Identifier: Intel
  */

#include <common.h> +#include <fdtdec.h> #include <asm/arch/fsp/azalia.h> #include <asm/fsp/fsp_support.h>

Please add DECLARE_GLOBAL_DATA_PTR here.

@@ -116,41 +118,162 @@ const struct pch_azalia_config azalia_config = { .reset_wait_timer_us = 300 };

+/**

• • Update the FSP's UPD. The FSP itself can be configured for defaults to
• • store in UPD through Intel's GUI configurator but likely a specific board
• • will want to update these from u-boot, so allow for that via device tree.
• • If the device tree does not specify a setting, trust the FSP's default.
• */

void update_fsp_upd(struct upd_region *fsp_upd) { struct memory_down_data *mem;

•   const void *blob = gd->fdt_blob;
  

•   int node;
  
  

•   /*
  

•    * Configure everything here to avoid the poor hard-pressed user
  

•    * needing to run Intel's binary configuration tool. It may also allow
  

•    * us to support the 1GB single core variant easily.
  

•    *
  

•    * TODO(sjg@chromium.org): Move to device tree
  

•    */
  

•   fsp_upd->mrc_init_tseg_size = 8;
  

•   fsp_upd->mrc_init_mmio_size = 0x800;
  

•   fsp_upd->emmc_boot_mode = 0xff;
  

•   fsp_upd->enable_sdio = 1;
  

•   fsp_upd->enable_sdcard = 1;
  

•   fsp_upd->enable_hsuart0 = 1;
    fsp_upd->azalia_config_ptr = (uint32_t)&azalia_config;
  

Should the azalia config be moved to device tree too?

•   fsp_upd->enable_i2_c0 = 0;
  

•   fsp_upd->enable_i2_c2 = 0;
  

•   fsp_upd->enable_i2_c3 = 0;
  

•   fsp_upd->enable_i2_c4 = 0;
  

•   fsp_upd->enable_xhci = 0;
  

•   fsp_upd->igd_render_standby = 1;
  

•   node = fdtdec_next_compatible(blob, 0, COMPAT_INTEL_BAYTRAIL_FSP);
  

•   if (node < 0) {
  

•           debug("%s: Cannot find FSP node\n", __func__);
  

•           /* TODO: change return type for error indication */
  

Do we need return error? Since you mentioned that if no device tree settings the default FSP values will be used.

•           return;
  

•   }
  

•   fsp_upd->mrc_init_tseg_size = fdtdec_get_int(blob, node,
  

•                                                "mrc_int_tseg_size",
  

•                                                fsp_upd->mrc_init_tseg_size);
  

•   fsp_upd->mrc_init_mmio_size = fdtdec_get_int(blob, node,
  

•                                                "mrc_init_mmio_size",
  

•                                                fsp_upd->mrc_init_mmio_size);
  

•   fsp_upd->mrc_init_spd_addr1 = fdtdec_get_int(blob, node,
  

•                                                "mrc_init_spd_addr1",
  

•                                                fsp_upd->mrc_init_spd_addr1);
  

•   fsp_upd->mrc_init_spd_addr2 = fdtdec_get_int(blob, node,
  

•                                                "mrc_init_spd_addr2",
  

•                                                fsp_upd->mrc_init_spd_addr2);
  

•   fsp_upd->emmc_boot_mode = fdtdec_get_int(blob, node, "emmc_boot_mode",
  

•                                            fsp_upd->emmc_boot_mode);
  

•   fsp_upd->enable_sdio = fdtdec_get_int(blob, node, "enable_sdio",
  

•                                         fsp_upd->enable_sdio);
  

•   fsp_upd->enable_sdcard = fdtdec_get_int(blob, node, "enable_sdcard",
  

•                                           fsp_upd->enable_sdcard);
  

•   fsp_upd->enable_hsuart0 = fdtdec_get_int(blob, node, "enable_hsuart0",
  

•                                            fsp_upd->enable_hsuart0);
  

•   fsp_upd->enable_hsuart1 = fdtdec_get_int(blob, node, "enable_hsuart1",
  

•                                            fsp_upd->enable_hsuart1);
  

•   fsp_upd->enable_spi = fdtdec_get_int(blob, node, "enable_spi",
  

•                                        fsp_upd->enable_spi);
  

•   fsp_upd->enable_sata = fdtdec_get_int(blob, node, "enable_sata",
  

•                                         fsp_upd->enable_sata);
  

•   fsp_upd->enable_azalia = fdtdec_get_int(blob, node, "enable_azalia",
  

•                                           fsp_upd->enable_azalia);
  

•   fsp_upd->enable_xhci = fdtdec_get_int(blob, node, "enable_xhci",
  

•                                         fsp_upd->enable_xhci);
  

•   fsp_upd->enable_lpe = fdtdec_get_int(blob, node, "enable_lpe",
  

•                                        fsp_upd->enable_lpe);
  

•   fsp_upd->lpss_sio_enable_pci_mode = fdtdec_get_int(blob, node,
  

•                                                      "lpss_sio_enable_pci_mode",
  

•                                                      fsp_upd->lpss_sio_enable_pci_mode);
  

•   fsp_upd->enable_dma0 = fdtdec_get_int(blob, node, "enable_dma0",
  

•                                         fsp_upd->enable_dma0);
  

•   fsp_upd->enable_dma1 = fdtdec_get_int(blob, node, "enable_dma1",
  

•                                         fsp_upd->enable_dma1);
  

•   fsp_upd->enable_i2_c0 = fdtdec_get_int(blob, node, "enable_i2_c0",
  

•                                          fsp_upd->enable_i2_c0);
  

•   fsp_upd->enable_i2_c1 = fdtdec_get_int(blob, node, "enable_i2_c1",
  

•                                          fsp_upd->enable_i2_c1);
  

•   fsp_upd->enable_i2_c2 = fdtdec_get_int(blob, node, "enable_i2_c2",
  

•                                          fsp_upd->enable_i2_c2);
  

•   fsp_upd->enable_i2_c3 = fdtdec_get_int(blob, node, "enable_i2_c3",
  

•                                          fsp_upd->enable_i2_c3);
  

•   fsp_upd->enable_i2_c4 = fdtdec_get_int(blob, node, "enable_i2_c4",
  

•                                          fsp_upd->enable_i2_c4);
  

•   fsp_upd->enable_i2_c5 = fdtdec_get_int(blob, node, "enable_i2_c5",
  

•                                          fsp_upd->enable_i2_c5);
  

•   fsp_upd->enable_i2_c6 = fdtdec_get_int(blob, node, "enable_i2_c6",
  

•                                          fsp_upd->enable_i2_c6);
  

•   fsp_upd->enable_pwm0 = fdtdec_get_int(blob, node, "enable_pwm0",
  

•                                         fsp_upd->enable_pwm0);
  

•   fsp_upd->enable_pwm1 = fdtdec_get_int(blob, node, "enable_pwm1",
  

•                                         fsp_upd->enable_pwm1);
  

•   fsp_upd->enable_hsi = fdtdec_get_int(blob, node, "enable_hsi",
  

•                                       fsp_upd->enable_hsi);
  

•   fsp_upd->igd_dvmt50_pre_alloc = fdtdec_get_int(blob, node,
  

•                                                  "igd_dvmt50_pre_alloc",
  

•                                                  fsp_upd->igd_dvmt50_pre_alloc);
  

•   fsp_upd->aperture_size = fdtdec_get_int(blob, node, "aperture_size",
  

•                                           fsp_upd->aperture_size);
  

•   fsp_upd->gtt_size = fdtdec_get_int(blob, node, "gtt_size",
  

•                                      fsp_upd->gtt_size);
  

•   fsp_upd->serial_debug_port_address = fdtdec_get_int(blob, node,
  

•                                                       "serial_debug_port_address",
  

•                                                       fsp_upd->serial_debug_port_address);
  

•   fsp_upd->serial_debug_port_type = fdtdec_get_int(blob, node,
  

•                                                    "serial_debug_port_type",
  

•                                                    fsp_upd->serial_debug_port_type);
  

•   fsp_upd->mrc_debug_msg = fdtdec_get_int(blob, node, "mrc_debug_msg",
  

•                                           fsp_upd->mrc_debug_msg);
  

•   fsp_upd->isp_enable = fdtdec_get_int(blob, node, "isp_enable",
  

•                                        fsp_upd->isp_enable);
  

•   fsp_upd->scc_enable_pci_mode = fdtdec_get_int(blob, node,
  

•                                                 "scc_enable_pci_mode",
  

•                                                 fsp_upd->scc_enable_pci_mode);
  

•   fsp_upd->igd_render_standby = fdtdec_get_int(blob, node,
  

•                                                "igd_render_standby",
  

•                                                fsp_upd->igd_render_standby);
  

•   fsp_upd->txe_uma_enable = fdtdec_get_int(blob, node, "txe_uma_enable",
  

•                                            fsp_upd->txe_uma_enable);
  

•   fsp_upd->os_selection = fdtdec_get_int(blob, node, "os_selection",
  

•                                          fsp_upd->os_selection);
  

•   fsp_upd->emmc45_ddr50_enabled = fdtdec_get_int(blob, node,
  

•                                                  "emmc45_ddr50_enabled",
  

•                                                  fsp_upd->emmc45_ddr50_enabled);
  

•   fsp_upd->emmc45_hs200_enabled = fdtdec_get_int(blob, node,
  

•                                                  "emmc45_hs200_enabled",
  

•                                                  fsp_upd->emmc45_hs200_enabled);
  

•   fsp_upd->emmc45_retune_timer_value = fdtdec_get_int(blob, node,
  

•                                                       "emmc45_retune_timer_value",
  

•                                                       fsp_upd->emmc45_retune_timer_value);
  

•   fsp_upd->igd_render_standby = fdtdec_get_int(blob, node,
  

•                                                "igd_render_standby",
  

•                                                fsp_upd->igd_render_standby);
  
    mem = &fsp_upd->memory_params;
  

•   mem->enable_memory_down = 1;
  

•   mem->dram_speed = 1;
  

•   mem->dimm_width = 1;
  

•   mem->dimm_density = 2;
  

•   mem->dimm_tcl = 0xb;
  

•   mem->dimm_trpt_rcd = 0xb;
  

•   mem->dimm_twr = 0xc;
  

•   mem->dimm_twtr = 6;
  

•   mem->dimm_trrd = 6;
  

•   mem->dimm_trtp = 6;
  

•   mem->dimm_tfaw = 0x14;
  

•   mem->enable_memory_down = fdtdec_get_int(blob, node,
  

•                                            "enable_memory_down",
  

•                                            mem->enable_memory_down);
  

•   if (mem->enable_memory_down) {
  

•           mem->dram_speed = fdtdec_get_int(blob, node, "dram_speed",
  

•                                            mem->dram_speed);
  

•           mem->dram_type = fdtdec_get_int(blob, node, "dram_type",
  

•                                           mem->dram_type);
  

•           mem->dimm_0_enable = fdtdec_get_int(blob, node, "dimm_0_enable",
  

•                                              mem->dimm_0_enable);
  

•           mem->dimm_1_enable = fdtdec_get_int(blob, node, "dimm_1_enable",
  

•                                               mem->dimm_1_enable);
  

•           mem->dimm_width = fdtdec_get_int(blob, node, "dimm_width",
  

•                                            mem->dimm_width);
  

•           mem->dimm_density = fdtdec_get_int(blob, node,
  

•                                              "dimm_density",
  

•                                              mem->dimm_density);
  

•           mem->dimm_bus_width = fdtdec_get_int(blob, node,
  

•                                                "dimm_bus_width",
  

•                                                mem->dimm_bus_width);
  

•           mem->dimm_sides = fdtdec_get_int(blob, node, "dimm_sides",
  

•                                            mem->dimm_sides);
  

•           mem->dimm_tcl = fdtdec_get_int(blob, node, "dimm_tcl",
  

•                                          mem->dimm_tcl);
  

•           mem->dimm_trpt_rcd = fdtdec_get_int(blob, node, "dimm_trpt_rcd",
  

•                                               mem->dimm_trpt_rcd);
  

•           mem->dimm_twr = fdtdec_get_int(blob, node, "dimm_twr",
  

•                                          mem->dimm_twr);
  

•           mem->dimm_twtr = fdtdec_get_int(blob, node, "dimm_twtr",
  

•                                           mem->dimm_twtr);
  

•           mem->dimm_trrd = fdtdec_get_int(blob, node, "dimm_trrd",
  

•                                           mem->dimm_trrd);
  

•           mem->dimm_trtp = fdtdec_get_int(blob, node, "dimm_trtp",
  

•                                           mem->dimm_trtp);
  

•           mem->dimm_tfaw = fdtdec_get_int(blob, node, "dimm_tfaw",
  

•                                           mem->dimm_tfaw);
  

•   }
  

} diff --git a/arch/x86/dts/minnowmax.dts b/arch/x86/dts/minnowmax.dts index bd21bfb..bb76e69 100644 --- a/arch/x86/dts/minnowmax.dts +++ b/arch/x86/dts/minnowmax.dts @@ -111,6 +111,33 @@

    };

•   fsp {
  

•           compatible = "intel,baytrail-fsp";
  

•           mrc_init_tseg_size = <8>;
  

•           mrc_init_mmio_size = <0x800>;
  

•           emmc_boot_mode = <0xff>;
  

•           enable_sdio = <1>;
  

•           enable_sdcard = <1>;
  

•           enable_hsuart0 = <1>;
  

•           enable_i2_c0 = <0>;
  

•           enable_i2_c2 = <0>;
  

•           enable_i2_c3 = <0>;
  

•           enable_i2_c4 = <0>;
  

•           enable_xhci = <0>;
  

•           igd_render_standby = <1>;
  

•           enable_memory_down = <1>;
  

•           dram_speed = <1>;
  

•           dimm_width = <1>;
  

•           dimm_density = <2>;
  

•           dimm_tcl = <0xb>;
  

•           dimm_trpt_rcd = <0xb>;
  

•           dimm_twr = <0xc>;
  

•           dimm_twtr = <6>;
  

•           dimm_trrd = <6>;
  

•           dimm_trtp = <6>;
  

•           dimm_tfaw = <0x14>;
  

•   };
  

•   spi {
            #address-cells = <1>;
            #size-cells = <0>;
  

diff --git a/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt new file mode 100644 index 0000000..a9841e7 --- /dev/null +++ b/doc/device-tree-bindings/misc/intel,baytrail-fsp.txt @@ -0,0 +1,113 @@ +Intel Baytrail FSP UPD Binding

Baytrail -> BayTrail. Please fix this globally.

+==============================

+The device tree node which describes the overriding of the Intel Baytrail FSP +UPD data for configuring the SoC.

+All properties are optional, if unspecified then the FSP's preconfigured choices +will be used.

+All properties can be found within the `upd_region` struct in +arch/x86/asm/arch-baytrail/fsp/fsp_vpd.h under the same names and in Intel's FSP

arch/x86/include/asm/ ...

+Binary Configuration Tool for Baytrail.

+Optional properties:

+- mrc_init_tseg_size +- mrc_init_mmio_size +- mrc_init_spd_addr1 +- mrc_init_spd_addr2 +- emmc_boot_mode +- enable_sdio +- enable_sdcard +- enable_hsuart0 +- enable_hsuart1 +- enable_spi +- enable_sata +- sata_mode +- enable_azalia +- enable_xhci +- enable_lpe +- lpss_sio_enable_pci_mode +- enable_dma0 +- enable_dma1 +- enable_i2_c0 +- enable_i2_c1 +- enable_i2_c2 +- enable_i2_c3 +- enable_i2_c4 +- enable_i2_c5 +- enable_i2_c6 +- enable_pwm0 +- enable_pwm1 +- enable_hsi +- igd_dvmt50_pre_alloc +- aperture_size +- gtt_size +- serial_debug_port_address +- serial_debug_port_type +- mrc_debug_msg +- isp_enable +- scc_enable_pci_mode +- igd_render_standby +- txe_uma_enable +- os_selection +- emmc45_ddr50_enabled +- emmc45_hs200_enabled +- emmc45_retune_timer_value +- enable_memory_down

•   The following are only used if enable_memory_down is enabled, otherwise
  

•   the FSP will use the DIMM's SPD information to configure the memory:
  

•   - dram_speed
  

•   - dram_type
  

•   - dimm_0_enable
  

•   - dimm_1_enable
  

•   - dimm_width
  

•   - dimm_density
  

•   - dimm_bus_width
  

•   - dimm_sides
  

•   - dimm_tcl
  

•   - dimm_trpt_rcd
  

•   - dimm_twr
  

•   - dimm_twtr
  

•   - dimm_trrd
  

•   - dimm_trtp
  

•   - dimm_tfaw
  

+Example (from MinnowMax Dual Core): +-----------------------------------

+/ {

•   ...
  

•   fsp {
  

•           compatible = "intel,baytrail-fsp";
  

•           mrc_init_tseg_size = <8>;
  

•           mrc_init_mmio_size = <0x800>;
  

•           emmc_boot_mode = <0xff>;
  

•           enable_sdio = <1>;
  

•           enable_sdcard = <1>;
  

•           enable_hsuart0 = <1>;
  

•           enable_i2_c0 = <0>;
  

•           enable_i2_c2 = <0>;
  

•           enable_i2_c3 = <0>;
  

•           enable_i2_c4 = <0>;
  

•           enable_xhci = <0>;
  

•           igd_render_standby = <1>;
  

•           enable_memory_down = <1>;
  

•           dram_speed = <1>;
  

•           dimm_width = <1>;
  

•           dimm_density = <2>;
  

•           dimm_tcl = <0xb>;
  

•           dimm_trpt_rcd = <0xb>;
  

•           dimm_twr = <0xc>;
  

•           dimm_twtr = <6>;
  

•           dimm_trrd = <6>;
  

•           dimm_trtp = <6>;
  

•           dimm_tfaw = <0x14>;
  

•   };
  

•   ...
  

+}; diff --git a/include/fdtdec.h b/include/fdtdec.h index 2323603..2b09cce 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -183,6 +183,7 @@ enum fdt_compat_id { COMPAT_SOCIONEXT_XHCI, /* Socionext UniPhier xHCI */ COMPAT_INTEL_PCH, /* Intel PCH */ COMPAT_INTEL_IRQ_ROUTER, /* Intel Interrupt Router */

•   COMPAT_INTEL_BAYTRAIL_FSP,      /* Intel Baytrail FSP */
  
    COMPAT_COUNT,
  

}; diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 9877849..c7a27ac 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -76,6 +76,7 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(SOCIONEXT_XHCI, "socionext,uniphier-xhci"), COMPAT(COMPAT_INTEL_PCH, "intel,bd82x6x"), COMPAT(COMPAT_INTEL_IRQ_ROUTER, "intel,irq-router"),

•   COMPAT(COMPAT_INTEL_BAYTRAIL_FSP, "intel,baytrail-fsp"),
  

};

const char *fdtdec_get_compatible(enum fdt_compat_id id)

Regards, Bin