Hi Wolfgang, Thanks a lot for your response ..
I also tried BMW_config and used cross-compiler as ppc_82xx-* .When i load this i did not get any thing on console. My processor is MPC8245.
Regards, Ramji
On Wed, Sep 3, 2008 at 8:29 PM, Wolfgang Denk wd@denx.de wrote:
Dear Ramji PanchaReddy,
in message 96ce52d50809030639w747d050fhe918a0f3edd2c1c0@mail.gmail.com you wrote:
I am using BMW board. i used Sandpoint8245_config for board configuration based on the CPU when i load the u-boot.bin i got following o/p
...
FLASH: *** failed *** ### ERROR ### Please RESET the board ###
Well, what did you expect when you configure for board "A" and run on board "B"?
1.Did i configured u-boot correctly for my board.If so what else i have
to
do to boot the board smoothly.
If you really have a "BMW" Board then you must configure U-Boot for the "BMW" board. Any other board configuration cannot work.
2.which cross compiler i have to use to compile this and where can we get it?
You can for example use the ELDK. See http://www.denx.de/wiki/view/DULG/ELDKAvailability
Best regards,
Wolfgang Denk
-- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de This restaurant was advertising breakfast any time. So I ordered french toast in the renaissance. - Steven Wright, comedian