[U-Boot] [PATCH] mmc: fsl_esdhc: Add support for DDR mode

Add support of the DDR mode for eSDHC driver. Enable it for i.MX6 SoC family only.

Change-Id: Ie27a945c9fe79d044cc886e269b60747f1744116 Signed-off-by: Volodymyr Riazantsev volodymyr.riazantsev@globallogic.com --- drivers/mmc/fsl_esdhc.c | 8 ++++++-- include/fsl_esdhc.h | 1 + 2 files changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index c55eb28..abec45f 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -319,7 +319,8 @@ esdhc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data) esdhc_write32(&regs->cmdarg, cmd->cmdarg); #if defined(CONFIG_FSL_USDHC) esdhc_write32(&regs->mixctrl, - (esdhc_read32(&regs->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F)); + (esdhc_read32(&regs->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F) + | (mmc->ddr_mode ? XFERTYP_DDREN : 0)); esdhc_write32(&regs->xfertyp, xfertyp & 0xFFFF0000); #else esdhc_write32(&regs->xfertyp, xfertyp); @@ -442,7 +443,7 @@ static void set_sysctl(struct mmc *mmc, uint clock) if ((sdhc_clk / (div * pre_div)) <= clock) break;

- pre_div >>= 1; + pre_div >>= mmc->ddr_mode ? 2 : 1; div -= 1;

clk = (pre_div << 8) | (div << 4); @@ -601,6 +602,9 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) }

cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC; +#ifdef CONFIG_MX6 + cfg->cfg.host_caps |= MMC_MODE_DDR_52MHz; +#endif

if (cfg->max_bus_width > 0) { if (cfg->max_bus_width < 8) diff --git a/include/fsl_esdhc.h b/include/fsl_esdhc.h index c1b6648..313fa1e 100644 --- a/include/fsl_esdhc.h +++ b/include/fsl_esdhc.h @@ -108,6 +108,7 @@ #define XFERTYP_RSPTYP_48_BUSY 0x00030000 #define XFERTYP_MSBSEL 0x00000020 #define XFERTYP_DTDSEL 0x00000010 +#define XFERTYP_DDREN 0x00000008 #define XFERTYP_AC12EN 0x00000004 #define XFERTYP_BCEN 0x00000002 #define XFERTYP_DMAEN 0x00000001