Move MTD-related lines out of the root Makefile. Put them in their respective directories. Enclose some of these new lines to skip them when building the SPL. MTD core files and some MTD device drivers are compiled in a mtd.o object and included in the final object only if MTD support is required (there are two different symbols for that, one for U-Boot and one for the SPL).
Now that all defconfigs have been fixed, we can stop the logic where enabling a command selects the core files to compile. This logic is broken since selecting a symbol with a 'depends on' will not enforce this secondary dependency.
Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com --- Makefile | 5 ---- drivers/Makefile | 7 ++---- drivers/mtd/Makefile | 50 +++++++++++++++++++++++++++------------ drivers/mtd/nand/Makefile | 5 ++++ 4 files changed, 42 insertions(+), 25 deletions(-)
diff --git a/Makefile b/Makefile index 1d9ade948b..e55c0b236e 100644 --- a/Makefile +++ b/Makefile @@ -708,11 +708,6 @@ libs-y += drivers/ libs-y += drivers/dma/ libs-y += drivers/gpio/ libs-y += drivers/i2c/ -libs-y += drivers/mtd/ -libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/ -libs-y += drivers/mtd/onenand/ -libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/ -libs-y += drivers/mtd/spi/ libs-y += drivers/net/ libs-y += drivers/net/phy/ libs-y += drivers/power/ \ diff --git a/drivers/Makefile b/drivers/Makefile index a4bb5e4975..708aa2a1a7 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/ obj-$(CONFIG_$(SPL_TPL_)INPUT) += input/ obj-$(CONFIG_$(SPL_TPL_)LED) += led/ obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/ -obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/ +obj-y += mtd/ obj-$(CONFIG_$(SPL_TPL_)PCH_SUPPORT) += pch/ obj-$(CONFIG_$(SPL_TPL_)PCI) += pci/ obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/ @@ -19,7 +19,6 @@ obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/ obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/ obj-$(CONFIG_$(SPL_TPL_)RTC_SUPPORT) += rtc/ obj-$(CONFIG_$(SPL_TPL_)SERIAL_SUPPORT) += serial/ -obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += mtd/spi/ obj-$(CONFIG_$(SPL_TPL_)SPI_SUPPORT) += spi/ obj-$(CONFIG_$(SPL_TPL_)TIMER) += timer/ obj-$(CONFIG_$(SPL_TPL_)VIRTIO) += virtio/ @@ -42,9 +41,6 @@ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/ obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/ obj-$(CONFIG_SPL_POWER_DOMAIN) += power/domain/ obj-$(CONFIG_SPL_DM_RESET) += reset/ -obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/ -obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/ -obj-$(CONFIG_SPL_UBI) += mtd/ubispl/ obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/ obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/ @@ -102,6 +98,7 @@ obj-$(CONFIG_QE) += qe/ obj-$(CONFIG_U_QE) += qe/ obj-y += mailbox/ obj-y += memory/ +obj-y += mtd/ obj-y += pwm/ obj-y += reset/ obj-y += input/ diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index c9a96adace..fd4c6687cb 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -3,20 +3,40 @@ # (C) Copyright 2000-2007 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-ifneq (,$(findstring y,$(CONFIG_MTD)$(CONFIG_CMD_ONENAND)$(CONFIG_CMD_MTD))) -obj-y += mtdcore.o mtd_uboot.o +mtd-$(CONFIG_MTD) += mtdcore.o mtd_uboot.o +mtd-$(CONFIG_DM_MTD) += mtd-uclass.o +mtd-$(CONFIG_MTD_PARTITIONS) += mtdpart.o +mtd-$(CONFIG_MTD_CONCAT) += mtdconcat.o +mtd-$(CONFIG_ALTERA_QSPI) += altera_qspi.o +mtd-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o +mtd-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o +mtd-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o +mtd-$(CONFIG_MW_EEPROM) += mw_eeprom.o +mtd-$(CONFIG_FLASH_PIC32) += pic32_flash.o +mtd-$(CONFIG_ST_SMI) += st_smi.o +mtd-$(CONFIG_STM32_FLASH) += stm32_flash.o +mtd-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o + +# U-Boot build +ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) + +ifneq ($(mtd-y),) +obj-y += mtd.o endif -obj-$(CONFIG_DM_MTD) += mtd-uclass.o -obj-$(CONFIG_MTD_PARTITIONS) += mtdpart.o -obj-$(CONFIG_MTD_CONCAT) += mtdconcat.o -obj-$(CONFIG_ALTERA_QSPI) += altera_qspi.o -obj-$(CONFIG_FLASH_CFI_DRIVER) += cfi_flash.o -obj-$(CONFIG_FLASH_CFI_MTD) += cfi_mtd.o -obj-$(CONFIG_FLASH_CFI_LEGACY) += jedec_flash.o -obj-$(CONFIG_MW_EEPROM) += mw_eeprom.o -obj-$(CONFIG_FLASH_PIC32) += pic32_flash.o -obj-$(CONFIG_ST_SMI) += st_smi.o -obj-$(CONFIG_STM32_FLASH) += stm32_flash.o -obj-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o - obj-y += nand/ +obj-y += onenand/ +obj-y += spi/ +obj-$(CONFIG_MTD_UBI) += ubi/ + +#SPL/TPL build +else + +ifneq ($(mtd-y),) +obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd.o +endif +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += nand/ +obj-$(CONFIG_SPL_ONENAND_SUPPORT) += onenand/ +obj-$(CONFIG_$(SPL_TPL_)SPI_FLASH_SUPPORT) += spi/ +obj-$(CONFIG_SPL_UBI) += ubispl/ + +endif diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index a358bc680e..96e186600a 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -1,5 +1,10 @@ # SPDX-License-Identifier: GPL-2.0+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),) nandcore-objs := core.o bbt.o obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o +obj-$(CONFIG_MTD_RAW_NAND) += raw/ obj-$(CONFIG_MTD_SPI_NAND) += spi/ +else +obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += raw/ +endif