Hi, Victor
Victor Gallardo wrote:
Hi Felix,
Here is my BDI configuration file for Canyonlands.
This one should work for you. This one configures OCM instead DDR.
-Victor Gallardo
Your configuration works fine, thanks a lot.
Felix.
-----Original Message----- From: u-boot-bounces@lists.denx.de [mailto:u-boot-bounces@lists.denx.de] On Behalf Of Felix Radensky Sent: Monday, September 01, 2008 9:43 AM To: U-Boot Subject: [U-Boot] Burning U-boot on 460EX using BDI3000
Hi,
Can U-boot be burned on 460EX based board (using BDI3000) without configuring DDR controller ? The BDI configuration file for Canyonlands board on Denx site http://www.denx.de/wiki/view/DULG/Appendix#Section_13.1. has no DDR setup, but also doesn't work on Canyonlands (fails on flash erase). The configuration file from AMCC site does work, but it contains full DDR setup.
Thanks a lot.
Felix. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot