On Oct 22, 2015 7:21 AM, "Tom Rini" trini@konsulko.com wrote:
On Thu, Oct 22, 2015 at 12:12:32PM +0100, Lad, Prabhakar wrote:
Hi Tom,
I was trying the latest master branch for ti8148 evm to boot from SD card, following are the steps which I followed:
1: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi- clean
distclean
2: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi-
ti814x_evm_config
3: make ARCH=arm CROSS_COMPILE=arm-cortex_a8-linux-gnueabi-
Copy the MLO and u-boot.bin to SD card boot partition which is bootable, I see no prints coming from the 1st stage bootlaoder, cant debug it as I don’t have access to JTAG.
Any pointers is this code tested ?
First, you need to use u-boot.img not u-boot.bin. Second, which PG do you have on the board? We only have support for PG1.0 today and not PG2.0 as Matt did the initial bring-up and only has a PG1.0 board. The code should be easily ported from the old PSP tree to support PG2.0 however.
-- Tom
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
Tom,
What about DM816x support? Mainline u-boot have anything for it? We finally have Linux 4.2.3 running on our board with .dts support. Now I'm starting the task of getting a mainline u-boot to work so we can get rid of the legacy dtb being part of kernel.
Regards,
Brian