22 Jan
2016
22 Jan
'16
8:26 p.m.
On Fri, Jan 22, 2016 at 1:16 PM, amessier.tyco@gmail.com wrote:
From: Alexandre Messier amessier@tycoint.com
When configuring a PHY in fixed (forced) link mode, in order for the changes to be applied, either one of these conditions must be triggered: 1- PHY is reset 2- Autoneg is restarted 3- PHY transitions from power-down to power-up
Neither of these is currently done, so effectively the fixed link configuration is not applied in the PHY.
Fix this by setting the Autoneg restart bit.
Signed-off-by: Alexandre Messier amessier@tycoint.com
Acked-by: Joe Hershberger joe.hershberger@ni.com