Move GPIO pinmux to MDIO node. Add GB Ethernet reset GPIO.
Add PIN_INPUT to Fix SPE ethernet reset gpio so that reading the GPIO can give correct status.
Signed-off-by: Roger Quadros rogerq@kernel.org --- arch/arm/dts/k3-am625-beagleplay.dts | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/arch/arm/dts/k3-am625-beagleplay.dts b/arch/arm/dts/k3-am625-beagleplay.dts index a34e0df2ab8..8ab838f1697 100644 --- a/arch/arm/dts/k3-am625-beagleplay.dts +++ b/arch/arm/dts/k3-am625-beagleplay.dts @@ -292,6 +292,8 @@ pinctrl-single,pins = < AM62X_IOPAD(0x0160, PIN_OUTPUT, 0) /* (AD24) MDIO0_MDC */ AM62X_IOPAD(0x015c, PIN_INPUT, 0) /* (AB22) MDIO0_MDIO */ + AM62X_IOPAD(0x003c, PIN_INPUT, 7) /* (M25) GPMC0_AD0.GPIO0_15 */ + AM62X_IOPAD(0x018c, PIN_INPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */ >; };
@@ -383,7 +385,6 @@ AM62X_IOPAD(0x016c, PIN_INPUT, 1) /* (Y18) RGMII2_TD0.RMII2_TXD0 */ AM62X_IOPAD(0x0170, PIN_INPUT, 1) /* (AA18) RGMII2_TD1.RMII2_TXD1 */ AM62X_IOPAD(0x0164, PIN_INPUT, 1) /* (AA19) RGMII2_TX_CTL.RMII2_TX_EN */ - AM62X_IOPAD(0x018c, PIN_OUTPUT, 7) /* (AC21) RGMII2_RD2.GPIO1_5 */ AM62X_IOPAD(0x0190, PIN_INPUT, 7) /* (AE22) RGMII2_RD3.GPIO1_6 */ AM62X_IOPAD(0x01f0, PIN_OUTPUT, 5) /* (A18) EXT_REFCLK1.CLKOUT0 */ >; @@ -597,6 +598,9 @@
cpsw3g_phy0: ethernet-phy@0 { reg = <0>; + reset-gpios = <&main_gpio0 15 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <50000>; };
cpsw3g_phy1: ethernet-phy@1 { @@ -615,7 +619,7 @@ "USR0", "USR1", "USR2", "USR3", "", "", "USR4", /* 3-9 */ "EEPROM_WP", /* 10 */ "CSI2_CAMERA_GPIO1", "CSI2_CAMERA_GPIO2", /* 11-12 */ - "CC1352P7_BOOT", "CC1352P7_RSTN", "", "", "", /* 13-17 */ + "CC1352P7_BOOT", "CC1352P7_RSTN", "GBE_RSTN", "", "", /* 13-17 */ "USR_BUTTON", "", "", "", "", "", "", "", "", /* 18-26 */ "", "", "", "", "", "", "", "", "", "HDMI_INT", /* 27-36 */ "", "VDD_WLAN_EN", "", "", "WL_IRQ", "GBE_INTN",/* 37-42 */