This patch added support for accessing dual memories in stacked connection with single chipselect line from controller.
For more info - see doc/SPI/README.dual-flash
Signed-off-by: Jagannadha Sutradharudu Teki jaganna@xilinx.com --- doc/SPI/README.dual-flash | 65 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/mtd/spi/sf.c | 3 +++ drivers/mtd/spi/sf_ops.c | 55 ++++++++++++++++++++++++++++++++------- drivers/mtd/spi/sf_probe.c | 8 +++++- include/spi.h | 8 ++++++ include/spi_flash.h | 8 ++++++ 6 files changed, 137 insertions(+), 10 deletions(-) create mode 100644 doc/SPI/README.dual-flash
diff --git a/doc/SPI/README.dual-flash b/doc/SPI/README.dual-flash new file mode 100644 index 0000000..ba0aa26 --- /dev/null +++ b/doc/SPI/README.dual-flash @@ -0,0 +1,65 @@ +SPI/QSPI Dual flash connection modes: +===================================== + +This describes how SPI/QSPI flash memories are connected to a given +controller in a single chip select line. + +Current spi_flash framework supports, single flash memory connected +to a given controller with single chip select line, but there are some +hw logics(ex: xilinx zynq qspi) that describes two/dual memories are +connected with a single chip select line from a controller. + +"dual_flash" from include/spi.h describes these types of connection mode + +Possible connections: +-------------------- +SF_SINGLE_FLASH: + - single spi flash memory connected with single chip select line. + + +------------+ CS +---------------+ + | |----------------------->| | + | Controller | I0[3:0] | Flash memory | + | SPI/QSPI |<======================>| (SPI/QSPI) | + | | CLK | | + | |----------------------->| | + +------------+ +---------------+ + +SF_DUAL_STACKED_FLASH: + - dual spi/qspi flash memories are connected with a single chipselect + line and these two memories are operating stacked fasion with shared buses. + - xilinx zynq qspi controller has implemented this feature [1] + + +------------+ CS +---------------+ + | |---------------------->| | + | | I0[3:0] | Upper Flash | + | | +=========>| memory | + | | | CLK | (SPI/QSPI) | + | | | +---->| | + | Controller | CS | | +---------------+ + | SPI/QSPI |------------|----|---->| | + | | I0[3:0] | | | Lower Flash | + | |<===========+====|====>| memory | + | | CLK | | (SPI/QSPI) | + | |-----------------+---->| | + +------------+ +---------------+ + + - two memory flash devices should has same hw part attributes (like size, + vendor..etc) + - Configurations: + on LQSPI_CFG register, Enable TWO_MEM[BIT:30] on LQSPI_CFG + Enable U_PAGE[BIT:28] if U_PAGE flag set - upper memory + Disable U_PAGE[BIT:28] if U_PAGE flag unset - lower memory + - Operation: + accessing memories serially like one after another. + by default, if U_PAGE is unset lower memory should accessible, + once user wants to access upper memory need to set U_PAGE. + +Note: Technically there is only one CS line from the controller, but +zynq qspi controller has an internal hw logic to enable additional CS +when controller is configured for dual memories. + +[1] http://www.xilinx.com/support/documentation/user_guides/ug585-Zynq-7000-TRM.... + +-- +Jagannadha Sutradharudu Teki jaganna@xilinx.com +05-01-2014. diff --git a/drivers/mtd/spi/sf.c b/drivers/mtd/spi/sf.c index d5e175c..c780a81 100644 --- a/drivers/mtd/spi/sf.c +++ b/drivers/mtd/spi/sf.c @@ -18,6 +18,9 @@ static int spi_flash_read_write(struct spi_slave *spi, unsigned long flags = SPI_XFER_BEGIN; int ret;
+ if (spi->flags & SPI_XFER_U_PAGE) + flags |= SPI_XFER_U_PAGE; + if (data_len == 0) flags |= SPI_XFER_END;
diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c index d039cc5..9fab40d 100644 --- a/drivers/mtd/spi/sf_ops.c +++ b/drivers/mtd/spi/sf_ops.c @@ -131,10 +131,28 @@ static int spi_flash_bank(struct spi_flash *flash, u32 offset) } #endif
+static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr) +{ + switch (flash->dual_flash) { + case SF_DUAL_STACKED_FLASH: + if (*addr >= (flash->size >> 1)) { + *addr -= flash->size >> 1; + flash->spi->flags |= SPI_XFER_U_PAGE; + } else { + flash->spi->flags &= ~SPI_XFER_U_PAGE; + } + break; + default: + debug("SF: Unsupported dual_flash=%d\n", flash->dual_flash); + break; + } +} + int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) { struct spi_slave *spi = flash->spi; unsigned long timebase; + unsigned long flags = SPI_XFER_BEGIN; int ret; u8 status; u8 check_status = 0x0; @@ -146,6 +164,9 @@ int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout) check_status = poll_bit; }
+ if (spi->flags & SPI_XFER_U_PAGE) + flags |= SPI_XFER_U_PAGE; + ret = spi_xfer(spi, 8, &cmd, NULL, SPI_XFER_BEGIN); if (ret) { debug("SF: fail to read %s status register\n", @@ -219,7 +240,7 @@ int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len) { - u32 erase_size; + u32 erase_size, erase_addr; u8 cmd[SPI_FLASH_CMD_LEN]; int ret = -1;
@@ -231,15 +252,20 @@ int spi_flash_cmd_erase_ops(struct spi_flash *flash, u32 offset, size_t len)
cmd[0] = flash->erase_cmd; while (len) { + erase_addr = offset; + + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual_flash(flash, &erase_addr); + #ifdef CONFIG_SPI_FLASH_BAR - ret = spi_flash_bank(flash, offset); + ret = spi_flash_bank(flash, erase_addr); if (ret < 0) return ret; #endif - spi_flash_addr(offset, cmd); + spi_flash_addr(erase_addr, cmd);
debug("SF: erase %2x %2x %2x %2x (%x)\n", cmd[0], cmd[1], - cmd[2], cmd[3], offset); + cmd[2], cmd[3], erase_addr);
ret = spi_flash_write_common(flash, cmd, sizeof(cmd), NULL, 0); if (ret < 0) { @@ -258,6 +284,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, size_t len, const void *buf) { unsigned long byte_addr, page_size; + u32 write_addr; size_t chunk_len, actual; u8 cmd[SPI_FLASH_CMD_LEN]; int ret = -1; @@ -266,8 +293,13 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset,
cmd[0] = flash->write_cmd; for (actual = 0; actual < len; actual += chunk_len) { + write_addr = offset; + + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual_flash(flash, &write_addr); + #ifdef CONFIG_SPI_FLASH_BAR - ret = spi_flash_bank(flash, offset); + ret = spi_flash_bank(flash, write_addr); if (ret < 0) return ret; #endif @@ -277,7 +309,7 @@ int spi_flash_cmd_write_ops(struct spi_flash *flash, u32 offset, if (flash->spi->max_write_size) chunk_len = min(chunk_len, flash->spi->max_write_size);
- spi_flash_addr(offset, cmd); + spi_flash_addr(write_addr, cmd);
debug("PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x } chunk_len = %zu\n", buf + actual, cmd[0], cmd[1], cmd[2], cmd[3], chunk_len); @@ -322,7 +354,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, size_t len, void *data) { u8 *cmd; - u32 remain_len, read_len; + u32 remain_len, read_len, read_addr; int bank_sel = 0; int ret = -1;
@@ -345,8 +377,13 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, cmd[0] = flash->read_cmd;
while (len) { + read_addr = offset; + + if (flash->dual_flash > SF_SINGLE_FLASH) + spi_flash_dual_flash(flash, &read_addr); + #ifdef CONFIG_SPI_FLASH_BAR - bank_sel = spi_flash_bank(flash, offset); + bank_sel = spi_flash_bank(flash, read_addr); if (bank_sel < 0) return ret; #endif @@ -356,7 +393,7 @@ int spi_flash_cmd_read_ops(struct spi_flash *flash, u32 offset, else read_len = remain_len;
- spi_flash_addr(offset, cmd); + spi_flash_addr(read_addr, cmd);
ret = spi_flash_read_common(flash, cmd, sizeof(cmd), data, read_len); diff --git a/drivers/mtd/spi/sf_probe.c b/drivers/mtd/spi/sf_probe.c index ac42b60..12196c6 100644 --- a/drivers/mtd/spi/sf_probe.c +++ b/drivers/mtd/spi/sf_probe.c @@ -134,6 +134,7 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, flash->spi = spi; flash->name = params->name; flash->memory_map = spi->memory_map; + flash->dual_flash = flash->spi->option;
/* Assign spi_flash ops */ flash->write = spi_flash_cmd_write_ops; @@ -148,6 +149,8 @@ static struct spi_flash *spi_flash_validate_params(struct spi_slave *spi, flash->page_size = (ext_jedec == 0x4d00) ? 512 : 256; flash->sector_size = params->sector_size; flash->size = flash->sector_size * params->nr_sectors; + if (flash->dual_flash & SF_DUAL_STACKED_FLASH) + flash->size <<= 1;
/* Compute erase sector and command */ if (params->flags & SECT_4K) { @@ -324,7 +327,10 @@ static struct spi_flash *spi_flash_probe_slave(struct spi_slave *spi) puts("\n"); #endif #ifndef CONFIG_SPI_FLASH_BAR - if (flash->size > SPI_FLASH_16MB_BOUN) { + if (((flash->dual_flash == SF_SINGLE_FLASH) && + (flash->size > SPI_FLASH_16MB_BOUN)) || + ((flash->dual_flash != SF_SINGLE_FLASH) && + (flash->size > SPI_FLASH_16MB_BOUN << 1))) { puts("SF: Warning - Only lower 16MiB accessible,"); puts(" Full access #define CONFIG_SPI_FLASH_BAR\n"); } diff --git a/include/spi.h b/include/spi.h index c8a9d87..d214d82 100644 --- a/include/spi.h +++ b/include/spi.h @@ -30,6 +30,7 @@ #define SPI_XFER_MMAP 0x08 /* Memory Mapped start */ #define SPI_XFER_MMAP_END 0x10 /* Memory Mapped End */ #define SPI_XFER_ONCE (SPI_XFER_BEGIN | SPI_XFER_END) +#define SPI_XFER_U_PAGE (1 << 5)
/* SPI TX operation modes */ #define SPI_OPM_TX_QPP 1 << 0 @@ -44,6 +45,9 @@ SPI_OPM_RX_DIO | SPI_OPM_RX_QOF | \ SPI_OPM_RX_QIOF
+/* SPI bus connection options */ +#define SPI_CONN_DUAL_SHARED 1 << 0 + /* Header byte that marks the start of the message */ #define SPI_PREAMBLE_END_BYTE 0xec
@@ -62,6 +66,8 @@ * @max_write_size: If non-zero, the maximum number of bytes which can * be written at once, excluding command bytes. * @memory_map: Address of read-only SPI flash access. + * @option: Varies SPI bus options - separate bus. + * @flags: Indication of SPI flags. */ struct spi_slave { unsigned int bus; @@ -71,6 +77,8 @@ struct spi_slave { unsigned int wordlen; unsigned int max_write_size; void *memory_map; + u8 option; + u8 flags; };
/** diff --git a/include/spi_flash.h b/include/spi_flash.h index f9d640c..fafcf6a 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -33,6 +33,12 @@ enum spi_read_cmds { #define RD_EXTN ARRAY_SLOW | DUAL_OUTPUT_FAST | DUAL_IO_FAST #define RD_FULL RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST
+/* Dual SPI flash memories */ +enum spi_dual_flash { + SF_SINGLE_FLASH = 0, + SF_DUAL_STACKED_FLASH = 1 << 0, +}; + /** * struct spi_flash_params - SPI/QSPI flash device params structure * @@ -61,6 +67,7 @@ extern const struct spi_flash_params spi_flash_params_table[]; * * @spi: SPI slave * @name: Name of SPI flash + * @dual_flash: Indicates dual flash memories - dual stacked * @size: Total flash size * @page_size: Write (page) size * @sector_size: Sector size @@ -85,6 +92,7 @@ extern const struct spi_flash_params spi_flash_params_table[]; struct spi_flash { struct spi_slave *spi; const char *name; + u8 dual_flash;
u32 size; u32 page_size;