From: Alex Marginean alexandru.marginean@nxp.com
The definition follows the DSA binding in kernel and describes the switch, its ports and PHYs. The switch node has the same structure as in Linux and this patch enables it (and relevant ports) for the LS1028A RDB board.
ENETC PF6 is the 2nd Eth controller linked to the switch on LS1028A, it is not used in U-Boot and was disabled. Ethernet port aliases were also added to better manage the multitude of ports available now.
Signed-off-by: Alex Marginean alexandru.marginean@nxp.com Signed-off-by: Claudiu Manoil claudiu.manoil@nxp.com Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Reviewed-by: Michael Walle michael@walle.cc --- v5: none.
v4: none.
v3: Added a comment denoting the PHY model present on the RDB.
v2: Switch node structure defined in dtsi now consistent with the Linux switch node definition. Moved aliases from dtsi to the RDB DTS to minimize impact on other boards (and for improved flexibility).
arch/arm/dts/fsl-ls1028a-rdb.dts | 64 ++++++++++++++++++++++++++++++++ arch/arm/dts/fsl-ls1028a.dtsi | 55 ++++++++++++++++++++++++++- 2 files changed, 118 insertions(+), 1 deletion(-)
diff --git a/arch/arm/dts/fsl-ls1028a-rdb.dts b/arch/arm/dts/fsl-ls1028a-rdb.dts index 85b4815b2ed7..3432fca35269 100644 --- a/arch/arm/dts/fsl-ls1028a-rdb.dts +++ b/arch/arm/dts/fsl-ls1028a-rdb.dts @@ -15,6 +15,12 @@ compatible = "fsl,ls1028a-rdb", "fsl,ls1028a"; aliases { spi0 = &fspi; + eth0 = &enetc0; + eth1 = &enetc2; + eth2 = &mscc_felix_port0; + eth3 = &mscc_felix_port1; + eth4 = &mscc_felix_port2; + eth5 = &mscc_felix_port3; }; };
@@ -131,9 +137,67 @@ phy-handle = <&rdb_phy0>; };
+&enetc2 { + status = "okay"; +}; + +&mscc_felix { + status = "okay"; +}; + +&mscc_felix_port0 { + label = "swp0"; + phy-handle = <&sw_phy0>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port1 { + label = "swp1"; + phy-handle = <&sw_phy1>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port2 { + label = "swp2"; + phy-handle = <&sw_phy2>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port3 { + label = "swp3"; + phy-handle = <&sw_phy3>; + phy-mode = "qsgmii"; + status = "okay"; +}; + +&mscc_felix_port4 { + ethernet = <&enetc2>; + status = "okay"; +}; + &mdio0 { status = "okay"; rdb_phy0: phy@2 { reg = <2>; }; + + /* VSC8514 QSGMII PHY */ + sw_phy0: phy@10 { + reg = <0x10>; + }; + + sw_phy1: phy@11 { + reg = <0x11>; + }; + + sw_phy2: phy@12 { + reg = <0x12>; + }; + + sw_phy3: phy@13 { + reg = <0x13>; + }; }; diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi index 5171bf28c79e..22d107d959de 100644 --- a/arch/arm/dts/fsl-ls1028a.dtsi +++ b/arch/arm/dts/fsl-ls1028a.dtsi @@ -151,9 +151,62 @@ reg = <0x000300 0 0 0 0>; status = "disabled"; }; + + mscc_felix: pci@0,5 { + reg = <0x000500 0 0 0 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mscc_felix_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + mscc_felix_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + mscc_felix_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + mscc_felix_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + mscc_felix_port4: port@4 { + reg = <4>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + mscc_felix_port5: port@5 { + reg = <5>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; + }; + enetc6: pci@0,6 { reg = <0x000600 0 0 0 0>; - status = "okay"; + status = "disabled"; phy-mode = "internal"; }; };