Re: [U-Boot] [PATCH] dfu: Implementation of target reset after communication with dfu-util's -R switch

Hello Lukasz,

Am 18.07.2013 13:19, schrieb Lukasz Majewski:

This patch extends dfu code to support transmission with -R switch specified at dfu-util.

When -R is specified, the extra USB_REQ_DFU_DETACH request is sent after successful data transmission. Then dfu resources are released and reset command is issued.

Signed-off-by: Lukasz Majewskil.majewski@samsung.com Signed-off-by: Kyungmin Parkkyungmin.park@samsung.com

---

common/cmd_dfu.c | 14 +++++++++++++- drivers/dfu/dfu.c | 11 +++++++++++ drivers/usb/gadget/f_dfu.c | 2 ++ include/dfu.h | 2 ++ 4 files changed, 28 insertions(+), 1 deletion(-)

Tested on AM335x based boards, so:

Tested-by: Heiko Schocher hs@denx.de

Thanks!

bye, Heiko