Hi,
On Tue, Jan 29, 2013 at 11:35 PM, DrEagle dreagle@doukki.net wrote:
Hi all,
-----Original Message----- From: u-boot-bounces at lists.denx.de [mailto:u-boot- bounces at lists.denx.de] On Behalf Of DrEagle Sent: 22 September 2012 12:45 To: DrEagle Cc: Lior Amsalem; u-boot at lists.denx.de; uboot at doukki.net Subject: [U-Boot] [PATCH v2 0/5] Marvell SDIO/MMC driver for Sheevaplug
This serie of patch add SDIO/MMC support to Sheevaplug board
Change from v1:
- Fix an issue with most SDHC cards because of timeout delay
drEagle (5): Add Marvell SDIO/MMC driver for Kirkwood SoC Add SDIO/MMC support for kirkwood SoC Add SDIO/MMC support for Sheevaplug board Fix env address for Sheevaplug board Fix timeout in Marvell SDIO MMC driver
Hi DrEagle I still request you to study mvsdhci.c which is similar framework used for Pantheon family of SoCs, try to use this infrastructure is possible for Kirkwood support.
Regards... Prafulla . . .
I have started looking at sdhci component but I find only theses small details :
... 9) mv_sdhci.c
This is a component of the SDHCI support, allowing it to run on Marvell Kirkwood chip. It is probable the SDHCI support will have to be modified to allow calling functions from this file based on information passed via platform_data. ... 16) sdhci.c
Follows the new API and also has a good encapsulation of the whole driver. The conversion here will be simple, though it'd be necessary to modify this driver to also support the Kirkwood series and probably also Tegra series of CPUs. See the respective parts of this section for details. ...
Can anybody give me more advice on how to port efficiently a patch for SDIO/MMC for SheevaPlug/Kirkwood SoC while using, as Prafulla asked, the *sdhci* framework.
Giving sdhci core support to your driver: I have listed few steps that I followed while doing on my driver. 1. On your driver need to allocate a sdhci_host 2. assign your sd bases address, version, some quirks (quirks are very impotent to change the functionalities of sdhci core)and few more... 3. call add_sdhci(sdhci_host, max_clk, min_clk) 4. any misc based on ur controller.
On my experience using with SDHCI is it is functionally an intelligent core have issues with command delay..this may be because it's implemented newly.
Starts using sdhci...post any issues..so-that we can tune sdhci more and more.
Thanks, Jagan.
What are the best practices and the technical details which can help me into this ?
Regards, drEagle
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot