On Fri, 22 Nov 2024 at 04:12, E Shattow lucent@gmail.com wrote:
On Thu, Nov 21, 2024 at 8:05 AM Heinrich Schuchardt heinrich.schuchardt@canonical.com wrote:
On 21.11.24 16:24, Andreas Schwab wrote:
On Nov 21 2024, Heinrich Schuchardt wrote:
Our MMC driver for JH7110 boards only supports reading to the low 4 GiB of memory. Booting boards with more memory requires EFI_LOADER_BOUNCE_BUFFER.
That doesn't change the situation with the booting problem I have.
Do you relate to https://lore.kernel.org/u-boot/mvm8qtnv310.fsf@suse.de/ where you had some problem reading the FAT file system and which was for as system with only 4 GiB of memory?
In E Shattow's case on a board with 8 GiB the file was read without error but then reported as not being an EFI binary.
Best regards
Heinrich
Hi,
Test failed for both boards here with origin/master then applying this series, then starfive_visionfive2_defconfig target and set CONFIG_BOOTSTD=n following with oldconfig target.
I think you need to apply another patch [1].
-sughosh
[1] - https://patchwork.ozlabs.org/project/uboot/patch/20241121142522.59059-2-hein...
Testing failed on 4GB Star64:
Hit any key to stop autoboot: 0 Unknown command 'bootflow' - try 'help' StarFive # bootefi bootmgr Card did not respond to voltage select! : -110 Not a PE-COFF file Loading Boot0000 'mmc 0' failed Booting: nvme 0 error: no such partition. grub rescue>
The grub EFI loader from EFI System Partition on eMMC fails to load. The same EFI System Partition data on NVMe is successful.
Testing failed on 8GB Mars CM Lite:
Hit any key to stop autoboot: 0 Unknown command 'bootflow' - try 'help' StarFive # bootefi bootmgr Card did not respond to voltage select! : -110 Failed to load EFI variables Error reading cluster Loading Boot0000 'mmc 0' failed EFI boot manager: Cannot load any image
We see that the grub EFI loader from this EFI System Partition fails to load from MMC (SD Card).
Procedure that was used to update SPI NOR flash on either board includes sanitizing the environment variable storages: env erase; env default -a -f; sf probe; dhcp; env set serverip <ip address of tftp server> tftpboot $loadaddr u-boot-spl.bin.normal.out; sf update $loadaddr 0 $filesize tftpboot $loadaddr u-boot.itb; sf update $loadaddr 100000 $filesize fatrm mmc 0:1 ubootefi.var
This does not say anything for or against the validity of the patch series as the root cause is a limitation of the dw mmc driver on JH7110 not resolved here.
-E