This converts the readme for this board to rST. I have tried not to change any semantics from the original (though I did convert MB to M).
Signed-off-by: Sean Anderson sean.anderson@seco.com ---
(no changes since v1)
board/freescale/ls1046ardb/MAINTAINERS | 1 + board/freescale/ls1046ardb/README | 76 ------------------- doc/board/nxp/index.rst | 1 + doc/board/nxp/ls1046ardb.rst | 100 +++++++++++++++++++++++++ 4 files changed, 102 insertions(+), 76 deletions(-) delete mode 100644 board/freescale/ls1046ardb/README create mode 100644 doc/board/nxp/ls1046ardb.rst
diff --git a/board/freescale/ls1046ardb/MAINTAINERS b/board/freescale/ls1046ardb/MAINTAINERS index efdea22bde..3c8cfe720d 100644 --- a/board/freescale/ls1046ardb/MAINTAINERS +++ b/board/freescale/ls1046ardb/MAINTAINERS @@ -14,3 +14,4 @@ F: configs/ls1046ardb_tfa_SECURE_BOOT_defconfig F: configs/ls1046ardb_SECURE_BOOT_defconfig F: configs/ls1046ardb_sdcard_SECURE_BOOT_defconfig F: configs/ls1046ardb_qspi_SECURE_BOOT_defconfig +F: doc/board/nxp/ls1046ardb.rst diff --git a/board/freescale/ls1046ardb/README b/board/freescale/ls1046ardb/README deleted file mode 100644 index 90c44f4bce..0000000000 --- a/board/freescale/ls1046ardb/README +++ /dev/null @@ -1,76 +0,0 @@ -Overview --------- -The LS1046A Reference Design Board (RDB) is a high-performance computing, -evaluation, and development platform that supports the QorIQ LS1046A -LayerScape Architecture processor. The LS1046ARDB provides SW development -platform for the Freescale LS1046A processor series, with a complete -debugging environment. The LS1046A RDB is lead-free and RoHS-compliant. - -LS1046A SoC Overview --------------------- -Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A -SoC overview. - - LS1046ARDB board Overview - ----------------------- - - SERDES1 Connections, 4 lanes supporting: - - Lane0: 10GBase-R with x1 RJ45 connector - - Lane1: 10GBase-R Cage - - Lane2: SGMII.5 - - Lane3: SGMII.6 - - SERDES2 Connections, 4 lanes supporting: - - Lane0: PCIe1 with miniPCIe slot - - Lane1: PCIe2 with PCIe x2 slot - - Lane2: PCIe3 with PCIe x4 slot - - Lane3: SATA - - DDR Controller - - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s - -IFC/Local Bus - - One 512 MB NAND flash with ECC support - - CPLD connection - - USB 3.0 - - one Type A port, one Micro-AB port - - SDHC: connects directly to a full SD/MMC slot - - DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz) - - 4 I2C controllers - - UART - - Two 4-pin serial ports at up to 115.2 Kbit/s - - Two DB9 D-Type connectors supporting one Serial port each - - ARM JTAG support - -Memory map from core's view ----------------------------- -Start Address End Address Description Size -0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB -0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB -0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB -0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB -0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB -0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB -0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - CPLD 4KB -0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB -0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M -0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M -0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB -0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G -0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G -0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G - -QSPI flash map: -Start Address End Address Description Size -0x00_4000_0000 - 0x00_400F_FFFF RCW + PBI 1MB -0x00_4010_0000 - 0x00_402F_FFFF U-Boot 2MB -0x00_4030_0000 - 0x00_403F_FFFF U-Boot Env 1MB -0x00_4040_0000 - 0x00_405F_FFFF PPA 2MB -0x00_4060_0000 - 0x00_408F_FFFF Secure boot header - + bootscript 3MB -0x00_4090_0000 - 0x00_4093_FFFF FMan ucode 256KB -0x00_4094_0000 - 0x00_4097_FFFF QE/uQE firmware 256KB -0x00_4098_0000 - 0x00_40FF_FFFF Reserved 6MB -0x00_4100_0000 - 0x00_43FF_FFFF FIT Image 48MB - -Booting Options ---------------- -a) QSPI boot -b) SD boot -c) eMMC boot diff --git a/doc/board/nxp/index.rst b/doc/board/nxp/index.rst index 63956287c5..4514b8951b 100644 --- a/doc/board/nxp/index.rst +++ b/doc/board/nxp/index.rst @@ -13,6 +13,7 @@ NXP Semiconductors imx8qxp_mek imxrt1020-evk imxrt1050-evk + ls1046ardb mx6sabreauto mx6sabresd mx6ul_14x14_evk diff --git a/doc/board/nxp/ls1046ardb.rst b/doc/board/nxp/ls1046ardb.rst new file mode 100644 index 0000000000..4bfeaa93dd --- /dev/null +++ b/doc/board/nxp/ls1046ardb.rst @@ -0,0 +1,100 @@ +.. SPDX-License-Identifier: GPL-2.0+ + +LS1046ARDB +========== + +The LS1046A Reference Design Board (RDB) is a high-performance computing, +evaluation, and development platform that supports the QorIQ LS1046A +LayerScape Architecture processor. The LS1046ARDB provides SW development +platform for the Freescale LS1046A processor series, with a complete +debugging environment. The LS1046A RDB is lead-free and RoHS-compliant. + +LS1046A SoC Overview +-------------------- +Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A +SoC overview. + +LS1046ARDB board Overview +------------------------- +- SERDES1 Connections, 4 lanes supporting: + + - Lane0: 10GBase-R with x1 RJ45 connector + - Lane1: 10GBase-R Cage + - Lane2: SGMII.5 + - Lane3: SGMII.6 + +- SERDES2 Connections, 4 lanes supporting: + + - Lane0: PCIe1 with miniPCIe slot + - Lane1: PCIe2 with PCIe x2 slot + - Lane2: PCIe3 with PCIe x4 slot + - Lane3: SATA + +- DDR Controller + + - 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s + +- IFC/Local Bus + + - One 512 MB NAND flash with ECC support + - CPLD connection + +- USB 3.0 + + - one Type A port, one Micro-AB port + +- SDHC: connects directly to a full SD/MMC slot +- DSPI: 64 MB high-speed flash Memory for boot code and storage (up to 108MHz) +- 4 I2C controllers +- UART + + - Two 4-pin serial ports at up to 115.2 Kbit/s + - Two DB9 D-Type connectors supporting one Serial port each + +- ARM JTAG support + +Memory map from core's view +---------------------------- + +================== ================== ================ ===== +Start Address End Address Description Size +================== ================== ================ ===== +``0x00_0000_0000`` ``0x00_000F_FFFF`` Secure Boot ROM 1M +``0x00_0100_0000`` ``0x00_0FFF_FFFF`` CCSRBAR 240M +``0x00_1000_0000`` ``0x00_1000_FFFF`` OCRAM0 64K +``0x00_1001_0000`` ``0x00_1001_FFFF`` OCRAM1 64K +``0x00_2000_0000`` ``0x00_20FF_FFFF`` DCSR 16M +``0x00_7E80_0000`` ``0x00_7E80_FFFF`` IFC - NAND Flash 64K +``0x00_7FB0_0000`` ``0x00_7FB0_0FFF`` IFC - CPLD 4K +``0x00_8000_0000`` ``0x00_FFFF_FFFF`` DRAM1 2G +``0x05_0000_0000`` ``0x05_07FF_FFFF`` QMAN S/W Portal 128M +``0x05_0800_0000`` ``0x05_0FFF_FFFF`` BMAN S/W Portal 128M +``0x08_8000_0000`` ``0x09_FFFF_FFFF`` DRAM2 6G +``0x40_0000_0000`` ``0x47_FFFF_FFFF`` PCI Express1 32G +``0x48_0000_0000`` ``0x4F_FFFF_FFFF`` PCI Express2 32G +``0x50_0000_0000`` ``0x57_FFFF_FFFF`` PCI Express3 32G +================== ================== ================ ===== + +QSPI flash map +-------------- + +================== ================== ================== ===== +Start Address End Address Description Size +================== ================== ================== ===== +``0x00_4000_0000`` ``0x00_400F_FFFF`` RCW + PBI 1M +``0x00_4010_0000`` ``0x00_402F_FFFF`` U-Boot 2M +``0x00_4030_0000`` ``0x00_403F_FFFF`` U-Boot Env 1M +``0x00_4040_0000`` ``0x00_405F_FFFF`` PPA 2M +``0x00_4060_0000`` ``0x00_408F_FFFF`` Secure boot header 3M + + bootscript +``0x00_4090_0000`` ``0x00_4093_FFFF`` FMan ucode 256K +``0x00_4094_0000`` ``0x00_4097_FFFF`` QE/uQE firmware 256K +``0x00_4098_0000`` ``0x00_40FF_FFFF`` Reserved 6M +``0x00_4100_0000`` ``0x00_43FF_FFFF`` FIT Image 48M +================== ================== ================== ===== + +Booting Options +--------------- +- QSPI boot +- SD boot +- eMMC boot