Hello Fabio,
-----Original Message----- From: Fabio Estevam festevam@gmail.com Sent: Monday, February 22, 2021 3:45 AM To: Peng Fan peng.fan@nxp.com; ZHIZHIKIN Andrey <andrey.zhizhikin@leica- geosystems.com> Cc: Lukas Rusak lorusak@gmail.com; U-Boot-Denx u-boot@lists.denx.de Subject: i.MX8MQ EVK not booting with latest mainline U-Boot
This email is not from Hexagon’s Office 365 instance. Please be careful while clicking links, opening attachments, or replying to this email.
Hi Peng and Andrey,
Lukas reported that i.MX8MQ EVK does not boot with the latest U-Boot and I confirm the same here too.
Unfortunately, I do not poses the i.MX8MQ EVK HW so I never tested the boot process. There is not much I can contribute here.
We are following the instructions from doc/board/freescale/imx8mq_evk.rst
Perhaps the only thing I can suggest here is to check the documentation (ATF, OP-TEE and DDR firmware version and placement) and align it with `imx-boot` Makefile to see if they match.
Can somebody maybe share more info on which errors are observed during the boot? Any boot log would be helpful here as well.
I haven't debugged this yet and I am wondering if you have any suggestions.
Thanks,
Fabio Estevam
-- Andrey