I'm a U-Boot newbie so please feel free to correct how I'm reporting this issue..
I recently downloaded the 2014.04-rc3 snapshot to build U-Boot for my custom DA850-based board. The only change was to add a new target "dav850evm_nand" in boards.cfg with the added parameter "USE_NAND".
The resulting AIS file was programmed into EVM-compatible NAND using standard sfh_OMAP-L138 method.
The board failed to boot, and stayed in a loop printing the SPL console message repeatedly.
After some debugging with CCS 5.5 and an XDS100v2, I found that incorrect code was being loaded into the 0xc108000 RAM destination. The da850evm.h file defines CONFIG_SYS_NAND_U_BOOT_OFFS as 0x28000, which corresponds to an AIS offset of 0x8000 but the u-boot header did not appear there in the AIS file. A search revealed that the Makefile catenated u-boot immediately after the SPL without any padding.
Further investigation revealed that the target Makefile needs CONFIG_SPL_MAX_SIZE to be defined as 0x8000 in order for the padding to be performed properly; however, this constant was apparently deleted during a series of changes in April, 2013 to accommodate separate code and BSS size limits for another target. In its place, CONFIG_SPL_MAX_FOOTPRINT was defined as 32768. Unfortunately, the da850evm Makefile does not refer to this constant.
To solve the problem, I added the following 2 lines in my custom-modified da850evm.h: #define CONFIG_SPL_PAD_TO 0x8000 #define CONFIG_SPL_MAX_SIZE 0x8000
although the first line may not be strictly required. This solved the problem and allowed the board to boot.
Doesn't this mean that other similar targets may be broken?
How can I assist with contributing the patch to fix this? One problem I have is that I only have an EXP, not an EVM board. My custom target board shares some features with the EVM such as NOR and NAND memory, but other things are different like the use of a fixed PHY. This makes it impossible for me to completely verify a da850evm build.
I would like to see more target configurations available for the DA850EVM but it seems like development for this has stopped. NAND boot was a simple change, but adding USB support required me to copy & paste code from the da830evm target. Are there any future plans to do this, or will I need to do this development for my custom board only?
Tom Taylor