Add HS200 to the list of supported modes and introduce tuning in the MMC startup process.
Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com --- drivers/mmc/mmc.c | 22 ++++++++++++++++++++-- include/mmc.h | 17 +++++++++++++++++ 2 files changed, 37 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index d7d1c91..2b710fe 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -621,6 +621,10 @@ static int mmc_set_card_speed(struct mmc *mmc, enum bus_mode mode) case MMC_HS_52: case MMC_DDR_52: speed_bits = EXT_CSD_TIMING_HS; + break; + case MMC_HS_200: + speed_bits = EXT_CSD_TIMING_HS200; + break; case MMC_LEGACY: speed_bits = EXT_CSD_TIMING_LEGACY; break; @@ -667,9 +671,12 @@ static int mmc_get_capabilities(struct mmc *mmc)
mmc->card_caps |= MMC_MODE_4BIT | MMC_MODE_8BIT;
- cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0xf; + cardtype = ext_csd[EXT_CSD_CARD_TYPE] & 0x3f;
- /* High Speed is set, there are two types: 52MHz and 26MHz */ + if (cardtype & (EXT_CSD_CARD_TYPE_HS200_1_2V | + EXT_CSD_CARD_TYPE_HS200_1_8V)) { + mmc->card_caps |= MMC_MODE_HS200; + } if (cardtype & EXT_CSD_CARD_TYPE_52) { if (cardtype & EXT_CSD_CARD_TYPE_DDR_52) mmc->card_caps |= MMC_MODE_DDR_52MHz; @@ -1263,6 +1270,7 @@ void mmc_dump_capabilities(const char *text, uint caps) struct mode_width_tuning { enum bus_mode mode; uint widths; + uint tuning; };
static int mmc_set_signal_voltage(struct mmc *mmc, uint signal_voltage) @@ -1373,6 +1381,7 @@ static const struct mode_width_tuning mmc_modes_by_pref[] = { { .mode = MMC_HS_200, .widths = MMC_MODE_8BIT | MMC_MODE_4BIT, + .tuning = MMC_SEND_TUNING_BLOCK_HS200 }, { .mode = MMC_DDR_52, @@ -1473,6 +1482,15 @@ static int mmc_select_mode_and_width(struct mmc *mmc) mmc_select_mode(mmc, mwt->mode); mmc_set_clock(mmc, mmc->tran_speed, false);
+ /* execute tuning if needed */ + if (mwt->tuning) { + err = mmc_execute_tuning(mmc, mwt->tuning); + if (err) { + debug("tuning failed\n"); + goto error; + } + } + /* do a transfer to check the configuration */ err = mmc_read_and_compare_ext_csd(mmc); if (!err) diff --git a/include/mmc.h b/include/mmc.h index dab68c5..b4ffa6a 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -56,6 +56,7 @@ #define MMC_MODE_HS (MMC_CAP(MMC_HS) | MMC_CAP(SD_HS)) #define MMC_MODE_HS_52MHz MMC_CAP(MMC_HS_52) #define MMC_MODE_DDR_52MHz MMC_CAP(MMC_DDR_52) +#define MMC_MODE_HS200 MMC_CAP(MMC_HS_200)
#define MMC_MODE_8BIT (1 << 30) #define MMC_MODE_4BIT (1 << 29) @@ -86,6 +87,7 @@ #define MMC_CMD_SET_BLOCKLEN 16 #define MMC_CMD_READ_SINGLE_BLOCK 17 #define MMC_CMD_READ_MULTIPLE_BLOCK 18 +#define MMC_SEND_TUNING_BLOCK_HS200 21 #define MMC_CMD_SET_BLOCK_COUNT 23 #define MMC_CMD_WRITE_SINGLE_BLOCK 24 #define MMC_CMD_WRITE_MULTIPLE_BLOCK 25 @@ -113,6 +115,13 @@ #define SD_CMD_APP_SEND_OP_COND 41 #define SD_CMD_APP_SEND_SCR 51
+static inline bool mmc_is_tuning_cmd(uint cmdidx) +{ + if (cmdidx == MMC_SEND_TUNING_BLOCK_HS200) + return true; + return false; +} + /* SCR definitions in different words */ #define SD_HIGHSPEED_BUSY 0x00020000 #define SD_HIGHSPEED_SUPPORTED 0x00020000 @@ -210,6 +219,12 @@ #define EXT_CSD_CARD_TYPE_DDR_52 (EXT_CSD_CARD_TYPE_DDR_1_8V \ | EXT_CSD_CARD_TYPE_DDR_1_2V)
+#define EXT_CSD_CARD_TYPE_HS200_1_8V (1<<4) /* Card can run at 200MHz */ +#define EXT_CSD_CARD_TYPE_HS200_1_2V (1<<5) /* Card can run at 200MHz */ + /* SDR mode @1.2V I/O */ +#define EXT_CSD_CARD_TYPE_HS200 (EXT_CSD_CARD_TYPE_HS200_1_8V | \ + EXT_CSD_CARD_TYPE_HS200_1_2V) + #define EXT_CSD_BUS_WIDTH_1 0 /* Card is in 1 bit mode */ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ @@ -217,6 +232,8 @@
#define EXT_CSD_TIMING_LEGACY 0 /* no high speed */ #define EXT_CSD_TIMING_HS 1 /* HS */ +#define EXT_CSD_TIMING_HS200 2 /* HS200 */ + #define EXT_CSD_BOOT_ACK_ENABLE (1 << 6) #define EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3) #define EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)