On 2022/9/15 15:23, Manoj Sai wrote:
This patch enables the following:
use preboot configuration to enable usb devices.
Enable USB configs so keyboards and other USB devices work, update the number of ports of the usb root hub.
- with this addition the updated USB device Tree:
1 Hub (12 Mb/s, 0mA) U-Boot Root Hub 1 Hub (12 Mb/s, 0mA) | U-Boot Root Hub | +-2 Hub (12 Mb/s, 100mA) USB 2.0 Hub [MTT]
1 Hub (5 Gb/s, 0mA) U-Boot XHCI Host Controller
enable crypto RNG support.
Change SPI speed and frequency:
increase the maximum SPI slave device speed, SPI flash max frequency for the environment from 10Mhz to 30MHz.
performance stats for speed update from 10MHz to 30MHz:
with 10Mhz speed update: => sf update 0x300000 0x800000 0x400000 4194304 bytes written, 0 bytes skipped in 36.819s, speed 119837 B/s
with 30Mhz speed update: => sf update 0x300000 0x800000 0x400000 4194304 bytes written, 0 bytes skipped in 20.319s, speed 220752 B/s
Signed-off-by: Manoj Sai abbaraju.manojsai@amarulasolutions.com Signed-off-by: Da Xue da.xue@libretech.co Signed-off-by: dsx724 da@lessconfused.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
Changes for v3:
- shortened the commit header.
Changes for v2:
- fixed prefix in the commit message.
- squash all four patches into a single patch.
configs/roc-pc-rk3399_defconfig | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/configs/roc-pc-rk3399_defconfig b/configs/roc-pc-rk3399_defconfig index 4625e47537..7754cb8388 100644 --- a/configs/roc-pc-rk3399_defconfig +++ b/configs/roc-pc-rk3399_defconfig @@ -20,6 +20,7 @@ CONFIG_DEBUG_UART=y CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x300000 # CONFIG_ANDROID_BOOT_IMAGE is not set +CONFIG_USE_PREBOOT=y CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb" CONFIG_DISPLAY_BOARDINFO_LATE=y CONFIG_SPL_MAX_SIZE=0x2e000 @@ -44,6 +45,7 @@ CONFIG_CMD_TIME=y CONFIG_SPL_OF_CONTROL=y CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" CONFIG_ENV_IS_IN_SPI_FLASH=y +CONFIG_ENV_SPI_MAX_HZ=30000000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_ROCKCHIP_GPIO=y @@ -54,6 +56,7 @@ CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_ROCKCHIP=y CONFIG_SF_DEFAULT_BUS=1 +CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_WINBOND=y CONFIG_ETH_DESIGNWARE=y CONFIG_GMAC_ROCKCHIP=y @@ -66,6 +69,8 @@ CONFIG_PWM_ROCKCHIP=y # CONFIG_RAM_ROCKCHIP_DEBUG is not set CONFIG_RAM_RK3399_LPDDR4=y CONFIG_DM_RESET=y +CONFIG_DM_RNG=y +CONFIG_RNG_ROCKCHIP=y CONFIG_BAUDRATE=1500000 CONFIG_DEBUG_UART_SHIFT=2 CONFIG_ROCKCHIP_SPI=y @@ -75,6 +80,9 @@ CONFIG_USB_XHCI_HCD=y CONFIG_USB_XHCI_DWC3=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_GENERIC=y +CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS=2 CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y CONFIG_USB_KEYBOARD=y