Hello,
the 2.4.4 kernel is rather old tree and it does not include support for MPC5200. Check http://www.denx.de on how to get an appropriate kernel tree. Therein you will also find icecube_5200_defconfig. The problems you reported are very likely due to invalid kernel configuration.
Hope it helps.
Wolfgang.
-- Original Message -- From: "Victor Wren" vwren@timension.com To: u-boot-users@lists.sourceforge.net Subject: [U-Boot-Users] Re:ELDK + MPC5200 Date: Mon, 01 Dec 2003 13:34:52 -0800
Sorry if this is a dumb newbie question. I'm trying to compile the 2.4.4
kernel that came with ELDK under RH9 using "ppc_82xx-make uImage". It gets
up to drivers/char/flash.c and dies at the "bd_t bd* =(bd_t *)__res" declaration, with an "bd_t undeclared" error.
I went looking for where bd_t is declared, and while some of the header
files
do declare bd_t, it doesn't seem to be any of the ones in linux/ or asm/ that are included by flash.c (or chained by header files that are included).
My u-boot files are not in the same directory tree as ELDK. Could that
cause
a problem? ELDK directories are in my path, and $CROSS_COMPILE=ppc_82xx-
I notice there doesn't seem to be a default config in the linux tree for the IceCube. Are there any special linux config options to be aware of?
Thanks, Victor Wren
Victor Wren Designer, Timension Inc. 1350 C Pear Ave Mountain View CA 94043 (650) 564-9397 Fax: (650) 564-9398 Opinions stated in this letter are not necessarily those of Timension Inc. or the management. All Rights Reserved. No spitting.
This SF.net email is sponsored by: SF.net Giveback Program. Does SourceForge.net help you be more productive? Does it help you create better code? SHARE THE LOVE, and help us help YOU! Click Here: http://sourceforge.net/donate/ _______________________________________________ U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users