Hi Stefano,
On 04/11/2016 11:57, linux-kernel-dev@beckhoff.com wrote:
From: Patrick Bruenn p.bruenn@beckhoff.com
Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices.
The CX9020 differs from i.MX53 Quick Start Board by:
- use uart2 instead of uart1
- DVI-D connector instead of VGA
- no audio
- CCAT FPGA connected to emi
- enable rtc
Signed-off-by: Patrick Bruenn p.bruenn@beckhoff.com
Version 4 should address most of the issues Stefan, Jagan and Simon
pointed out.
There is still some small issues that avoid the patches to be merged. Board cannot be built due to missing CONFIG_:
arm: + mx53cx9020+drivers/video/cfb_console.c: In function 'cfg_video_init': +drivers/video/cfb_console.c:2022:23: error: 'CONFIG_SYS_CONSOLE_FG_COL' undeclared (first use in this function) +drivers/video/cfb_console.c:2022:23: note: each undeclared identifier is reported only once for each function it appears in +drivers/video/cfb_console.c:2025:23: error: 'CONFIG_SYS_CONSOLE_BG_COL' undeclared (first use in this function) +make[3]: *** [drivers/video/cfb_console.o] Error 1 +make[2]: *** [drivers/video] Error 2 +make[1]: *** [drivers] Error 2
I have checked why and I could fix with the following patch:
Thank you for your effort!
configs/mx53cx9020_defconfig | 6 ++++++ include/configs/mx53cx9020.h | 4 ---- 2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig index 3603907..6954cf5 100644 --- a/configs/mx53cx9020_defconfig +++ b/configs/mx53cx9020_defconfig @@ -11,6 +11,7 @@ CONFIG_CMD_BOOTZ=y CONFIG_CMD_MMC=y #CONFIG_CMD_USB=y # CONFIG_CMD_SETEXPR is not set +CONFIG_VIDEO=y CONFIG_CMD_DHCP=y CONFIG_CMD_MII=y CONFIG_CMD_PING=y @@ -27,3 +28,8 @@ CONFIG_FPGA_CYCLON2=y CONFIG_CMD_FPGA=y CONFIG_PINCTRL=y CONFIG_PINCTRL_IMX5=y +# CONFIG_VIDEO_SW_CURSOR is not set +CONFIG_CFB_CONSOLE=y +CONFIG_VGA_AS_SINGLE_DEVICE=y +CONFIG_SYS_CONSOLE_BG_COL=0x00 +CONFIG_SYS_CONSOLE_FG_COL=0xa0 diff --git a/include/configs/mx53cx9020.h b/include/configs/mx53cx9020.h index ac8b2a2..87c75d4 100644 --- a/include/configs/mx53cx9020.h +++ b/include/configs/mx53cx9020.h @@ -187,11 +187,7 @@
/* Framebuffer and LCD */ #define CONFIG_PREBOOT -#define CONFIG_VIDEO #define CONFIG_VIDEO_IPUV3 -#define CONFIG_CFB_CONSOLE -#define CONFIG_VGA_AS_SINGLE_DEVICE -#define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE #define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
2.7.4
Now on you: if you agree, I can integrate this fix into your patch and merge it into the u-boot-imx tree. If you disagree, please check it and send an update version, thanks !
Agreed! I applied it and did a test run. Everything works as it is supposed to be.
Best regards, Patrick
Signed-off-by: Patrick Bruenn p.bruenn@beckhoff.com
Best regards, Stefano Babic
--
========== DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic@denx.de =========================================================== ==========
Beckhoff Automation GmbH & Co. KG | Managing Director: Dipl. Phys. Hans Beckhoff Registered office: Verl, Germany | Register court: Guetersloh HRA 7075