Dear Lucas,
I used RTL8139 driver on MPC8241 board. It works fine. The followings are defined in the configuration file.
/* PCI memory */ #define CFG_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT) #define CFG_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
#define CFG_DBAT2L CFG_IBAT2L #define CFG_DBAT2U CFG_IBAT2U
/* PCI Stuff */ #define CONFIG_PCI #define CONFIG_PCI_PNP
#define CONFIG_NET_MULTI
#define CONFIG_RTL8139 /* for RTL8139 */ #define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) #define _IO_BASE 0x00000000
The result of pci command are
# pci Scanning PCI devices on bus 0 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 00.00.00 0x1057 0x0006 Bridge device 0x00 00.0c.00 0x10ec 0x8139 Network controller 0x00 :
# pci header 00.0c.00 vendor ID = 0x10ec device ID = 0x8139 command register = 0x0007 status register = 0x0290 revision ID = 0x20 class code = 0x02 (Network controller) sub class code = 0x00 programming interface = 0x00 cache line = 0x08 latency time = 0x20 header type = 0x00 BIST = 0x00 base address 0 = 0x00000001 base address 1 = 0x80000000 base address 2 = 0x00000000 base address 3 = 0x00000000 base address 4 = 0x00000000 base address 5 = 0x00000000 cardBus CIS pointer = 0x00000000 sub system vendor ID = 0x11ec sub system ID = 0x8139 expansion ROM base address = 0x00000000 interrupt line = 0xff interrupt pin = 0x01 min Grant = 0x20 max Latency = 0x40
Masami Komiya