Sync the rk3368 DTs and associated bits from 5.14-rc1.
Signed-off-by: Peter Robinson pbrobinson@gmail.com --- arch/arm/dts/rk3368-geekbox.dts | 70 +++-------- arch/arm/dts/rk3368-lion-haikou.dts | 4 + arch/arm/dts/rk3368-lion.dtsi | 21 +--- arch/arm/dts/rk3368-px5-evb.dts | 178 +++++++++++----------------- arch/arm/dts/rk3368.dtsi | 65 +++++----- 5 files changed, 118 insertions(+), 220 deletions(-)
diff --git a/arch/arm/dts/rk3368-geekbox.dts b/arch/arm/dts/rk3368-geekbox.dts index 46cdddfcea..62aa97a0b8 100644 --- a/arch/arm/dts/rk3368-geekbox.dts +++ b/arch/arm/dts/rk3368-geekbox.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* * Copyright (c) 2016 Andreas Färber - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. */
/dts-v1/; @@ -48,6 +11,10 @@ model = "GeekBox"; compatible = "geekbuying,geekbox", "rockchip,rk3368";
+ aliases { + mmc0 = &emmc; + }; + chosen { stdout-path = "serial2:115200n8"; }; @@ -66,7 +33,7 @@
ir: ir-receiver { compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; + gpios = <&gpio3 RK_PD6 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&ir_int>; }; @@ -77,7 +44,7 @@ pinctrl-0 = <&pwr_key>;
power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; @@ -87,14 +54,14 @@ leds: gpio-leds { compatible = "gpio-leds";
- blue { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + blue_led: led-0 { + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; label = "geekbox:blue:led"; default-state = "on"; };
- red { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; + red_led: led-1 { + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_HIGH>; label = "geekbox:red:led"; default-state = "off"; }; @@ -115,10 +82,7 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; - keep-power-in-suspend; non-removable; - num-slots = <1>; vmmc-supply = <&vcc_io>; vqmmc-supply = <&vcc18_flash>; pinctrl-names = "default"; @@ -147,7 +111,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pmic_sleep>; interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; @@ -258,8 +222,6 @@ };
vcc_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; regulator-name = "vcc_sd"; };
@@ -275,23 +237,23 @@ &pinctrl { ir { ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; }; };
keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; };
pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; };
pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; }; diff --git a/arch/arm/dts/rk3368-lion-haikou.dts b/arch/arm/dts/rk3368-lion-haikou.dts index 7fcb1eacea..cae01d35b9 100644 --- a/arch/arm/dts/rk3368-lion-haikou.dts +++ b/arch/arm/dts/rk3368-lion-haikou.dts @@ -10,6 +10,10 @@ model = "Theobroma Systems RK3368-uQ7 Baseboard"; compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";
+ aliases { + mmc1 = &sdmmc; + }; + chosen { stdout-path = "serial0:115200n8"; }; diff --git a/arch/arm/dts/rk3368-lion.dtsi b/arch/arm/dts/rk3368-lion.dtsi index 532e6a6828..bcd7977fb0 100644 --- a/arch/arm/dts/rk3368-lion.dtsi +++ b/arch/arm/dts/rk3368-lion.dtsi @@ -7,6 +7,10 @@ #include "rk3368.dtsi"
/ { + aliases { + mmc0 = &emmc; + }; + chosen { stdout-path = "serial0:115200n8"; }; @@ -150,7 +154,6 @@ assigned-clocks = <&cru SCLK_MAC>; assigned-clock-parents = <&ext_gmac>; clock_in_out = "input"; - phy-handle = <&phy0>; phy-supply = <&vcc33_io>; phy-mode = "rgmii"; pinctrl-names = "default"; @@ -161,22 +164,6 @@ tx_delay = <0x10>; rx_delay = <0x10>; status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - /* Microsemi VSC8531-02 */ - phy0: phy@0 { - compatible = "ethernet-phy-id0007.0570"; - reg = <0>; - vsc8531,clk-out-frequency = <125000000>; - vsc8531,edge-slowdown = <7>; - vsc8531,led-0-mode = <1>; - vsc8531,led-1-mode = <2>; - }; - }; };
&i2c0 { diff --git a/arch/arm/dts/rk3368-px5-evb.dts b/arch/arm/dts/rk3368-px5-evb.dts index e9c5ebad47..5ccaa5f7a3 100644 --- a/arch/arm/dts/rk3368-px5-evb.dts +++ b/arch/arm/dts/rk3368-px5-evb.dts @@ -1,43 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) /* - * Copyright (c) 2017 Rockchip Electronics Co., Ltd - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. + * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd */
/dts-v1/; @@ -45,30 +8,21 @@ #include <dt-bindings/input/input.h>
/ { - model = "PX5 EVB"; + model = "Rockchip PX5 EVB"; compatible = "rockchip,px5-evb", "rockchip,px5", "rockchip,rk3368";
+ aliases { + mmc0 = &sdmmc; + mmc1 = &emmc; + }; + chosen { stdout-path = "serial4:115200n8"; };
memory@0 { - device_type = "memory"; reg = <0x0 0x0 0x0 0x40000000>; - }; - - ext_gmac: gmac-clk { - compatible = "fixed-clock"; - clock-frequency = <125000000>; - clock-output-names = "ext_gmac"; - #clock-cells = <0>; - }; - - ir: ir-receiver { - compatible = "gpio-ir-receiver"; - gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&ir_int>; + device_type = "memory"; };
keys: gpio-keys { @@ -77,29 +31,13 @@ pinctrl-0 = <&pwr_key>;
power { - gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; label = "GPIO Power"; linux,code = <KEY_POWER>; wakeup-source; }; };
- leds: gpio-leds { - compatible = "gpio-leds"; - - blue { - gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; - label = "geekbox:blue:led"; - default-state = "on"; - }; - - red { - gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; - label = "geekbox:red:led"; - default-state = "off"; - }; - }; - vcc_sys: vcc-sys-regulator { compatible = "regulator-fixed"; regulator-name = "vcc_sys"; @@ -115,27 +53,14 @@ bus-width = <8>; cap-mmc-highspeed; clock-frequency = <150000000>; - disable-wp; - keep-power-in-suspend; + mmc-hs200-1_8v; + no-sdio; + no-sd; non-removable; - num-slots = <1>; - vmmc-supply = <&vcc_io>; - vqmmc-supply = <&vcc18_flash>; pinctrl-names = "default"; pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; -}; - -&gmac { - status = "okay"; - phy-supply = <&vcc_lan>; - phy-mode = "rgmii"; - clock_in_out = "input"; - assigned-clocks = <&cru SCLK_MAC>; - assigned-clock-parents = <&ext_gmac>; - pinctrl-names = "default"; - pinctrl-0 = <&rgmii_pins>; - tx_delay = <0x30>; - rx_delay = <0x10>; + vmmc-supply = <&vcc_io>; + vqmmc-supply = <&vcc18_flash>; };
&i2c0 { @@ -144,10 +69,10 @@ rk808: pmic@1b { compatible = "rockchip,rk808"; reg = <0x1b>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pmic_int>, <&pmic_sleep>; - interrupt-parent = <&gpio0>; - interrupts = <5 IRQ_TYPE_LEVEL_LOW>; rockchip,system-power-controller; vcc1-supply = <&vcc_sys>; vcc2-supply = <&vcc_sys>; @@ -202,12 +127,12 @@ regulator-name = "vcc18_flash"; };
- vcc33_lcd: LDO_REG2 { + vcca_33: LDO_REG2 { regulator-always-on; regulator-boot-on; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - regulator-name = "vcc33_lcd"; + regulator-name = "vcca_33"; };
vdd_10: LDO_REG3 { @@ -218,11 +143,10 @@ regulator-name = "vdd_10"; };
- vcca_18: LDO_REG4 { - regulator-boot-on; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-name = "vcca_18"; + avdd_33: LDO_REG4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "avdd_33"; };
vccio_sd: LDO_REG5 { @@ -258,46 +182,76 @@ };
vcc_sd: SWITCH_REG1 { - regulator-always-on; - regulator-boot-on; regulator-name = "vcc_sd"; };
- vcc_lan: SWITCH_REG2 { + vcc33_lcd: SWITCH_REG2 { regulator-always-on; regulator-boot-on; - regulator-name = "vcc_lan"; + regulator-name = "vcc33_lcd"; }; }; }; };
-&pinctrl { - ir { - ir_int: ir-int { - rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; - }; +&i2c1 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma250"; + reg = <0x18>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>; }; +};
+&i2c2 { + status = "okay"; + + gsl1680: touchscreen@40 { + compatible = "silead,gsl1680"; + reg = <0x40>; + interrupt-parent = <&gpio3>; + interrupts = <RK_PD4 IRQ_TYPE_EDGE_FALLING>; + power-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + silead,max-fingers = <5>; + }; +}; + +&pinctrl { keys { pwr_key: pwr-key { - rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; }; };
pmic { pmic_sleep: pmic-sleep { - rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; + rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; };
pmic_int: pmic-int { - rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; }; }; };
-&saradc { +&sdmmc { status = "okay"; + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + card-detect-delay = <200>; + no-sdio; + sd-uhs-sdr12; + sd-uhs-sdr25; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_bus4>, <&sdmmc_cd>; + rockchip,default-sample-phase = <90>; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; };
&tsadc { diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi index cd2c322071..4c64fbefb4 100644 --- a/arch/arm/dts/rk3368.dtsi +++ b/arch/arm/dts/rk3368.dtsi @@ -136,37 +136,6 @@ }; };
- amba: bus { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac_peri: dma-controller@ff250000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff250000 0x0 0x4000>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC_PERI>; - clock-names = "apb_pclk"; - }; - - dmac_bus: dma-controller@ff600000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff600000 0x0 0x4000>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - arm,pl330-broken-no-flushp; - arm,pl330-periph-burst; - clocks = <&cru ACLK_DMAC_BUS>; - clock-names = "apb_pclk"; - }; - }; - arm-pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, @@ -399,8 +368,20 @@ status = "disabled"; };
+ dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC_PERI>; + clock-names = "apb_pclk"; + }; + thermal-zones { - cpu { + cpu_thermal: cpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */
@@ -444,7 +425,7 @@ }; };
- gpu { + gpu_thermal: gpu-thermal { polling-delay-passive = <100>; /* milliseconds */ polling-delay = <5000>; /* milliseconds */
@@ -532,6 +513,18 @@ status = "disabled"; };
+ dmac_bus: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC_BUS>; + clock-names = "apb_pclk"; + }; + i2c0: i2c@ff650000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>; @@ -565,7 +558,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; clocks = <&cru PCLK_PWM1>; - clock-names = "pwm"; status = "disabled"; };
@@ -576,7 +568,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; clocks = <&cru PCLK_PWM1>; - clock-names = "pwm"; status = "disabled"; };
@@ -585,7 +576,6 @@ reg = <0x0 0xff680020 0x0 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM1>; - clock-names = "pwm"; status = "disabled"; };
@@ -596,7 +586,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; clocks = <&cru PCLK_PWM1>; - clock-names = "pwm"; status = "disabled"; };
@@ -675,6 +664,8 @@ compatible = "rockchip,rk3368-timer", "rockchip,rk3288-timer"; reg = <0x0 0xff810000 0x0 0x20>; interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; + clock-names = "pclk", "timer"; };
spdif: spdif@ff880000 {