Dear Simon Kagstrom,
In message 20090825091256.0fc009d2@marrow.netinsight.se you wrote:
Small update: I've tried with the ELDK toolchains 4.1 and 4.2 (2007-01-21 and 2008-11-24). Both these fail as well, albeit in a slightly different way. The printfs are correct, but 4.2 still has the nand_bbt issue:
U-Boot 2009.08-rc3-00013-g853ae64 (Aug 25 2009 - 08:28:05) Marvell-OpenRD_base
SoC: Kirkwood 88F6281_A0 DRAM: 512 MB NAND: 512 MiB nand_bbt: Can't scan flash and build the RAM-based BBT Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Marvell>>
The 4.1 version just hangs on the NAND printout. I've tested both with USE_PRIVATE_LIBGCC=yes and USE_PRIVATE_LIBGCC unset, and get the same results.
Did you make any progress an analyzing the cause of the issue?
Best regards,
Wolfgang Denk