From: Peng Fan peng.fan@nxp.com
Move env to imx8mn_evk.env Switch to support BOOTSTD with a bsp bootcmd as fallback.
Signed-off-by: Peng Fan peng.fan@nxp.com --- board/freescale/imx8mn_evk/imx8mn_evk.env | 67 +++++++++++++++++++++++++++++++ configs/imx8mn_evk_defconfig | 3 +- include/configs/imx8mn_evk.h | 30 -------------- 3 files changed, 69 insertions(+), 31 deletions(-)
diff --git a/board/freescale/imx8mn_evk/imx8mn_evk.env b/board/freescale/imx8mn_evk/imx8mn_evk.env new file mode 100644 index 0000000000000000000000000000000000000000..16a6543ffc692f5ddce5baf1ced11889c444f3b1 --- /dev/null +++ b/board/freescale/imx8mn_evk/imx8mn_evk.env @@ -0,0 +1,67 @@ +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ + +boot_fdt=try +boot_fit=no +boot_targets=mmc1 mmc2 dhcp +bootm_size=0x10000000 +console=ttymxc1,115200 +fdt_addr_r=0x48000000 +fdtfile=CONFIG_DEFAULT_FDT_FILE +fdtoverlay_addr_r=0x49000000 +initrd_addr=0x48080000 +image=Image +ip_dyn=yes +kernel_addr_r=0x42000000 +loadaddr=CONFIG_SYS_LOAD_ADDR +mmcautodetect=yes +mmcdev=CONFIG_SYS_MMC_ENV_DEV +mmcpart=1 +mmcroot=/dev/mmcblk1p2 rootwait rw +prepare_mcore=setenv mcore_clk clk-imx8mn.mcore_booted; +pxefile_addr_r=0x40100000 +ramdisk_addr_r=0x48080000 +scriptaddr=0x40000000 + +mmcargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console} root=${mmcroot} +prepare_mcore=setenv mcore_clk clk-imx8mn.mcore_booted +loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} +loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile} +mmcboot=echo Booting from mmc ...; + run mmcargs; + if test ${boot_fit} = yes || test ${boot_fit} = try; then + bootm ${loadaddr}; + else + if run loadfdt; then + booti ${loadaddr} - ${fdt_addr_r}; + else + echo WARN: Cannot load the DT; + fi; + fi +netargs=setenv bootargs ${jh_clk} ${mcore_clk} console=${console} root=/dev/nfs + ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp +netboot=echo Booting from net ...; + run netargs; + if test ${ip_dyn} = yes; then + setenv get_cmd dhcp; + else + setenv get_cmd tftp; + fi; + ${get_cmd} ${loadaddr} ${image}; + if test ${boot_fit} = yes || test ${boot_fit} = try; then + bootm ${loadaddr}; + else + if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then + booti ${loadaddr} - ${fdt_addr_r}; + else + echo WARN: Cannot load the DT; + fi; + fi; +bsp_bootcmd=echo Running BSP bootcmd ...; + mmc dev ${mmcdev}; + if mmc rescan; then + if run loadimage; then + run mmcboot; + else + run netboot; + fi; + fi; diff --git a/configs/imx8mn_evk_defconfig b/configs/imx8mn_evk_defconfig index 43860fe3f56f9a178bbf83dbedb6a2ca0bba19fe..b112c30b8242aab890b5861b67a9c8a01ddbc460 100644 --- a/configs/imx8mn_evk_defconfig +++ b/configs/imx8mn_evk_defconfig @@ -5,6 +5,7 @@ CONFIG_SYS_MALLOC_LEN=0x2000000 CONFIG_SPL_GPIO=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_ENV_SOURCE_FILE="imx8mn_evk" CONFIG_ENV_SIZE=0x1000 CONFIG_ENV_OFFSET=0x400000 CONFIG_DM_GPIO=y @@ -26,8 +27,8 @@ CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000 CONFIG_FIT=y CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y -CONFIG_DISTRO_DEFAULTS=y CONFIG_OF_SYSTEM_SETUP=y +CONFIG_BOOTCOMMAND="bootflow scan -lb; run bsp_bootcmd" CONFIG_DEFAULT_FDT_FILE="imx8mn-evk.dtb" CONFIG_SYS_CBSIZE=2048 CONFIG_SYS_PBSIZE=2074 diff --git a/include/configs/imx8mn_evk.h b/include/configs/imx8mn_evk.h index ca02e26c26e42f7606be4e17f77ccf25bdcf9bd1..9972dc17812b7da4f2996f96a618cf8abc871288 100644 --- a/include/configs/imx8mn_evk.h +++ b/include/configs/imx8mn_evk.h @@ -13,36 +13,6 @@ #define CFG_SYS_UBOOT_BASE \ (QSPI0_AMBA_BASE + CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR * 512)
-#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 1) \ - func(MMC, mmc, 2) \ - func(DHCP, dhcp, na) - -#include <config_distro_bootcmd.h> - -/* Initial environment variables */ -/* see include/configs/ti_armv7_common.h */ -#define ENV_MEM_LAYOUT_SETTINGS \ - "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \ - "kernel_addr_r=0x42000000\0" \ - "fdt_addr_r=0x48000000\0" \ - "fdtoverlay_addr_r=0x49000000\0" \ - "ramdisk_addr_r=0x48080000\0" \ - "initrd_addr=0x48080000\0" \ - "scriptaddr=0x40000000\0" \ - "pxefile_addr_r=0x40100000\0" - -#define CFG_EXTRA_ENV_SETTINGS \ - "image=Image\0" \ - BOOTENV \ - "console=ttymxc1,115200\0" \ - "boot_fit=no\0" \ - "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \ - "bootm_size=0x10000000\0" \ - "mmcpart=1\0" \ - "mmcroot=/dev/mmcblk1p2 rootwait rw\0" \ - ENV_MEM_LAYOUT_SETTINGS - /* Link Definitions */
#define CFG_SYS_INIT_RAM_ADDR 0x40000000