Hi David,
Am Donnerstag, 4. April 2019, 05:51:31 CEST schrieb David Wu:
Some Socs use the pull-pin-default config param, need to add it.
Signed-off-by: David Wu david.wu@rock-chips.com
drivers/pinctrl/rockchip/pinctrl-rockchip-core.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c index b84b079064..77ac981c40 100644 --- a/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c +++ b/drivers/pinctrl/rockchip/pinctrl-rockchip-core.c @@ -509,9 +509,8 @@ static const struct pinconf_param rockchip_conf_params[] = { { "bias-bus-hold", PIN_CONFIG_BIAS_BUS_HOLD, 0 }, { "bias-pull-up", PIN_CONFIG_BIAS_PULL_UP, 1 }, { "bias-pull-down", PIN_CONFIG_BIAS_PULL_DOWN, 1 },
- { "bias-pull-pin-default", PIN_CONFIG_BIAS_PULL_PIN_DEFAULT, 1 }, { "drive-strength", PIN_CONFIG_DRIVE_STRENGTH, 0 },
- { "input-enable", PIN_CONFIG_INPUT_ENABLE, 1 },
- { "input-disable", PIN_CONFIG_INPUT_ENABLE, 0 },
you also remove these, is that intentional ... if so the commit message should explain it :-)
Thanks Heiko
{ "input-schmitt-disable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 0 }, { "input-schmitt-enable", PIN_CONFIG_INPUT_SCHMITT_ENABLE, 1 }, };