Re: [U-Boot] CFI flash broken for 8-bit bus

On 2011/03/24 5:07 AM, Aaron Williams wrote:

I have it working on our 8-bit boards properly now, though I've only done some limited testing.

I basically put in the correct addresses into cfi_flash.h and updated various addresses for 8-bit support. The problem was that the CFI code was written using the 16-bit addresses which don't work for an 8-bit bus.

I added a mask which is used to calculate the correct address for 16 and 32- bit busses. I have only been able to test with 8-bit and 16-bit Spansion devices though.

-Aaron

Hi Aaron,

I'm happy to test it, when you post the patch.

Regards,

Rogan