
Hi,
-----Original Message----- From: Jagan Teki [mailto:jagan@openedev.com] Sent: Wednesday, November 16, 2016 9:33 AM To: u-boot@lists.denx.de Cc: Jagan Teki jagan@openedev.com; Simon Glass sjg@chromium.org; Bin Meng bmeng.cn@gmail.com; York Sun york.sun@nxp.com; Vignesh R vigneshr@ti.com; Mugunthan V N mugunthanvnm@ti.com; Michal Simek michal.simek@xilinx.com; Siva Durga Prasad Paladugu sivadur@xilinx.com Subject: [PATCH v6 04/21] sf: Cleanup spi_flash_info{}
- Proper tabs spaces
- Removed unnecessary
- Added meaningful comments
Cc: Simon Glass sjg@chromium.org Cc: Bin Meng bmeng.cn@gmail.com Cc: York Sun york.sun@nxp.com Cc: Vignesh R vigneshr@ti.com Cc: Mugunthan V N mugunthanvnm@ti.com Cc: Michal Simek michal.simek@xilinx.com Cc: Siva Durga Prasad Paladugu sivadur@xilinx.com Signed-off-by: Jagan Teki jagan@openedev.com
Reviewed-by: Siva Durga Prasad Paladugu sivadur@xilinx.com
Thanks, Siva
drivers/mtd/spi/sf_internal.h | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h index a9455ac..d7ac6b3 100644 --- a/drivers/mtd/spi/sf_internal.h +++ b/drivers/mtd/spi/sf_internal.h @@ -108,17 +108,9 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len, #define JEDEC_ID(info) (((info)->id[1]) << 8 | ((info)->id[2])) #define JEDEC_EXT(info) (((info)->id[3]) << 8 | ((info)->id[4]))
-/**
- struct spi_flash_info - SPI/QSPI flash device params structure
- @name: Device name
([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO])
- @sector_size: Isn't necessarily a sector size from vendor,
the size listed here is what works with
CMD_ERASE_64K
- @nr_sectors: No.of sectors on this device
- @flags: Important param, for flash specific behaviour
- */
struct spi_flash_info {
- const char *name;
/* Device name ([MANUFLETTER][DEVTYPE][DENSITY][EXTRAINFO]) */
const char *name;
/*
- This array stores the ID bytes.
@@ -128,12 +120,16 @@ struct spi_flash_info { u8 id[5]; u8 id_len;
- u32 sector_size;
- u32 nr_sectors;
- /*
* The size listed here is what works with SPINOR_OP_SE, which isn't
* necessarily called a "sector" by the vendor.
*/
- u32 sector_size;
- u32 nr_sectors;
- u16 page_size;
- u16 page_size;
- u16 flags;
- u16 flags;
#define SECT_4K BIT(0) #define E_FSR BIT(1)
#define SST_WR BIT(2)
1.9.1