Rename to USB_EHCI_FSL, use Kconfig to select ehci accordingly.
Signed-off-by: Ran Wang ran.wang_1@nxp.com --- drivers/usb/host/Kconfig | 6 ++++++ include/configs/ls1012aqds.h | 11 ----------- include/configs/ls1021aqds.h | 11 ----------- include/configs/ls1021atwr.h | 20 -------------------- 4 files changed, 6 insertions(+), 42 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c79f866..90b2f78 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -186,6 +186,12 @@ config USB_EHCI_GENERIC ---help--- Enables support for generic EHCI controller.
+config USB_EHCI_FSL + bool "Support for FSL on-chip EHCI USB controller" + default n + select CONFIG_EHCI_HCD_INIT_AFTER_RESET + ---help--- + Enables support for the on-chip EHCI controller on FSL chips. endif # USB_EHCI_HCD
config USB_OHCI_HCD diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h index af5f37c..bf4262a 100644 --- a/include/configs/ls1012aqds.h +++ b/include/configs/ls1012aqds.h @@ -107,17 +107,6 @@ #define CONFIG_SF_DEFAULT_BUS 1 #define CONFIG_SF_DEFAULT_CS 0
-/* -* USB -*/ -/* EHCI Support - disbaled by default */ -/*#define CONFIG_HAS_FSL_DR_USB*/ - -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif - /* MMC */ #ifdef CONFIG_MMC #define CONFIG_FSL_ESDHC diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 6669f2f..d088e83 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -394,17 +394,6 @@ unsigned long get_board_ddr_clk(void); #endif
/* - * USB - */ -/* EHCI Support - disbaled by default */ -/*#define CONFIG_HAS_FSL_DR_USB*/ - -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif - -/* * Video */ #ifdef CONFIG_VIDEO_FSL_DCU_FB diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 3db7ef1..15d6638 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -24,26 +24,6 @@ #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE
-/* - * USB - */ - -/* - * EHCI Support - disbaled by default as - * there is no signal coming out of soc on - * this board for this controller. However, - * the silicon still has this controller, - * and anyone can use this controller by - * taking signals out on their board. - */ - -/*#define CONFIG_HAS_FSL_DR_USB*/ - -#ifdef CONFIG_HAS_FSL_DR_USB -#define CONFIG_USB_EHCI_FSL -#define CONFIG_EHCI_HCD_INIT_AFTER_RESET -#endif - #define CONFIG_SYS_CLK_FREQ 100000000 #define CONFIG_DDR_CLK_FREQ 100000000