Re: [U-Boot] [PATCH v2] test/py: only check for SPL signature if SPL uses serial output

On 02/16/2016 11:48 PM, Heiko Schocher wrote:

check for U-Boot SPL signature only if SPL really has a serial output. So check if CONFIG_SPL_SERIAL_SUPPORT is active in board config.

I suspect you didn't test this; it causes all tests to fail on all platforms...

diff --git a/test/py/u_boot_console_base.py b/test/py/u_boot_console_base.py

•        bcfg = u_boot_console.config.buildconfig
  

I think that should be self.config.buildconfig instead; there is no u_boot_console variable at this point in the code.