Marco,
U-Boot provides generic commands to read/write memory locations (md/mw respectively) no matter where they physically are. Once your memory controller is set up properly (chip select timing etc.) you can easily access the SRAM from U-Boot shell.
HTH, llandre
DAVE Electronics System House - R&D Department web: http://www.dave.eu email: r&d2@dave-tech.it
Hi all, we are developing a product based on AT91SAM9261 and equipped with u-boot v 1.1.5 and linux kernel v 2.6.22.1. Since our HW architecture foresee a SRAM (1Mx16 and 55 ns of speed time) like the Cypress62167DV3011-55 we need to know if u-boot has the support for it. Thanks a lot in anticipation for any kind of help/info. Best regards, Marco Cacre Olivetti S.p.a
This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
U-Boot-Users mailing list U-Boot-Users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/u-boot-users