On 01/06/2016 01:53 AM, Daniel Schwierzeck wrote:
2016-01-04 15:01 GMT+01:00 Purna Chandra Mandal purna.mandal@microchip.com:
Signed-off-by: Purna Chandra Mandal purna.mandal@microchip.com
Changes in v2:
- drop unnecessary board_early_init_f()
- use LEAF(), END() macros for lowlevel_init
- move initialization of board_init_f() argument to common start.S
- move initdram() from board/microchip/ to mach-pic32/cpu.c
- remove MIPS virtual address in favor of physical address in dts file
arch/mips/cpu/start.S | 2 + arch/mips/dts/pic32mzda.dtsi | 64 +++++++++++++ arch/mips/mach-pic32/Kconfig | 16 +++- arch/mips/mach-pic32/Makefile | 2 +- arch/mips/mach-pic32/cpu.c | 146 ++++++++++++++++++++++++++++++ arch/mips/mach-pic32/include/mach/pic32.h | 3 + arch/mips/mach-pic32/lowlevel_init.S | 27 ++++++ arch/mips/mach-pic32/reset.c | 36 ++++++++ 8 files changed, 294 insertions(+), 2 deletions(-) create mode 100644 arch/mips/dts/pic32mzda.dtsi create mode 100644 arch/mips/mach-pic32/lowlevel_init.S create mode 100644 arch/mips/mach-pic32/reset.c
diff --git a/arch/mips/cpu/start.S b/arch/mips/cpu/start.S index e95cdca..a7e6722 100644 --- a/arch/mips/cpu/start.S +++ b/arch/mips/cpu/start.S @@ -185,6 +185,8 @@ reset: PTR_ADDU t0, k0, GD_MALLOC_BASE # gd->malloc_base offset sw sp, 0(t0) #endif
/* Initialize args to zero. */li a0, 0x0please create a separate patch for this change. Also the code must be compatible with MIPS64 now, so please do:
PTR_LI a0, 0
ack.
PTR_LA t9, board_init_f jr t9diff --git a/arch/mips/dts/pic32mzda.dtsi b/arch/mips/dts/pic32mzda.dtsi new file mode 100644 index 0000000..f518ba8 --- /dev/null +++ b/arch/mips/dts/pic32mzda.dtsi @@ -0,0 +1,64 @@ +/*
- Copyright 2015 Microchip Technology, Inc.
- Purna Chandra Mandal, purna.mandal@microchip.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/clock/microchip,clock.h> +#include "skeleton.dtsi"
+/ {
compatible = "microchip,pic32mzda", "microchip,pic32mz";cpus {cpu@0 {compatible = "mips,mips14kc";};};clock: clk@1f801200 {compatible = "microchip,pic32mzda_clk";reg = <0x1f801200 0x1000>;clock-cells = <1>;};uart1: serial@1f822000 {compatible = "microchip,pic32mzda-uart";reg = <0x1f822000 0x50>;interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;status = "disabled";clocks = <&clock PB2CLK>;};uart2: serial@1f822200 {compatible = "microchip,pic32mzda-uart";reg = <0x1f822200 0x50>;interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;clocks = <&clock PB2CLK>;status = "disabled";};uart6: serial@1f822a00 {compatible = "microchip,pic32mzda-uart";reg = <0x1f822a00 0x50>;interrupts = <188 IRQ_TYPE_LEVEL_HIGH>;clocks = <&clock PB2CLK>;status = "disabled";};evic: interrupt-controller@1f810000 {compatible = "microchip,pic32mzda-evic";interrupt-controller;#interrupt-cells = <2>;reg = <0x1f810000 0x1000>;};pinctrl: pinctrl@1f801400 {compatible = "microchip,pic32mzda-pinctrl";reg = <0x1f801400 0x100>, /* in */<0x1f801500 0x200>; /* out */status = "disabled";};+}; diff --git a/arch/mips/mach-pic32/Kconfig b/arch/mips/mach-pic32/Kconfig index 98b0b88..a394791 100644 --- a/arch/mips/mach-pic32/Kconfig +++ b/arch/mips/mach-pic32/Kconfig @@ -2,11 +2,25 @@ menu "Microchip PIC32 platforms" depends on MACH_PIC32
config SYS_SOC
default "none"
default "pic32mzda" if SOC_PIC32MZDAchoice prompt "PIC32 SoC select"
+config SOC_PIC32MZDA
bool "Microchip PIC32MZ[DA] family"select SUPPORTS_LITTLE_ENDIANselect SUPPORTS_CPU_MIPS32_R1select SUPPORTS_CPU_MIPS32_R2select SYS_MIPS_CACHE_INIT_RAM_LOADselect MIPS_BOOT_CMDLINE_LEGACYselect MIPS_BOOT_FDTthose are user-selectable options and should not be enforced by the SoC. But you can enable them in your defconfig.
ack.
select DM_SERIALselect PIC32_SERIALselect PIC32_PINCTRLhelpThis supports Microchip PIC32MZ[DA] family of microcontrollers.endchoice
choice diff --git a/arch/mips/mach-pic32/Makefile b/arch/mips/mach-pic32/Makefile index cb42607..e321e65 100644 --- a/arch/mips/mach-pic32/Makefile +++ b/arch/mips/mach-pic32/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ #
-obj-y = cpu.o +obj-y = cpu.o lowlevel_init.o reset.o \ No newline at end of file diff --git a/arch/mips/mach-pic32/cpu.c b/arch/mips/mach-pic32/cpu.c index 58fd3ab..7bd0f07 100644 --- a/arch/mips/mach-pic32/cpu.c +++ b/arch/mips/mach-pic32/cpu.c @@ -6,8 +6,154 @@
*/
your copyright and SPDX license identifier are missing
Will add.
#include <common.h> +#include <dm.h> +#include <clk.h> +#include <debug_uart.h> +#include <linux/compiler.h> +#include <asm/io.h> +#include <asm/mipsregs.h> +#include <mach/pic32.h> +#include <mach/ddr.h> +#include <dt-bindings/clock/microchip,clock.h>
+/* Flash prefetch */ +#define PRECON 0x00 +#define PRECONCLR (PRECON + _CLR_OFFSET) +#define PRECONSET (PRECON + _SET_OFFSET)
+/* Flash ECCCON */ +#define ECC_MASK 0x03 +#define ECC_SHIFT 4
+DECLARE_GLOBAL_DATA_PTR;
+static ulong clk_get_cpu_rate(void) +{
int ret;struct udevice *dev;ret = uclass_get_device(UCLASS_CLK, 0, &dev);if (ret) {panic("uclass-clk: device not found\n");return 0;}return clk_get_rate(dev);+}
+/* initialize prefetch module related to cpu_clk */ +static void init_prefetch(void) +{ +#define _MHZ(x) ((x) * 1000000)
please do not define and undefine macros inside of function bodies. You could define it once at the beginning of this file or in a header file. You could also define the clock frequencies directly, e.g.
#define CLK_83_MHZ 83 * 1000 * 1000
ack.
void __iomem *base;int v, nr_waits;ulong rate;rate = clk_get_cpu_rate();/* get flash ECC type */base = pic32_ioremap(PIC32_CFG_BASE);v = (readl(base + CFGCON) >> ECC_SHIFT) & ECC_MASK;if (v < 2) {if (rate < _MHZ(66))nr_waits = 0;else if (rate < _MHZ(133))nr_waits = 1;elsenr_waits = 2;} else {if (rate <= _MHZ(83))nr_waits = 0;else if (rate <= _MHZ(166))nr_waits = 1;elsenr_waits = 2;}base = pic32_ioremap(PREFETCH_BASE);writel(nr_waits, base + PRECON);/* Enable prefetch for all */writel(0x30, base + PRECONSET);+#undef _MHZ +}
+/* arch specific CPU init after DM */ +int arch_cpu_init_dm(void) +{
/* flash prefetch */init_prefetch();return 0;+}
+/* Un-gate DDR2 modules (gated by default) */ +static void ddr2_pmd_ungate(void) +{
void __iomem *regs;regs = pic32_ioremap(PIC32_CFG_BASE);writel(0, regs + PMD7);+}
+/* initialize the DDR2 Controller and DDR2 PHY */ phys_size_t initdram(int board_type) {
ddr2_pmd_ungate();ddr2_phy_init();ddr2_ctrl_init();return ddr2_calculate_size();+}
+int misc_init_r(void) +{
set_io_port_base(0);return 0;+}
+#ifdef CONFIG_DISPLAY_BOARDINFO +const char *get_core_name(void) +{
u32 proc_id;const char *str;proc_id = read_c0_prid();switch (proc_id) {case 0x19e28:str = "PIC32MZ[DA]";break;default:str = "UNKNOWN";}return str;+} +#endif
+#ifdef CONFIG_CMD_CLK +int soc_clk_dump(void) +{ +#define F_MHZ(x) ((x) / 1000000)
int i, ret;struct udevice *dev;ret = uclass_get_device(UCLASS_CLK, 0, &dev);if (ret) {printf("clk-uclass not found\n");return ret;}printf("PLL Speed: %lu MHz\n", F_MHZ(clk_get_periph_rate(dev, PLLCLK)));printf("CPU Speed: %lu MHz\n", F_MHZ(clk_get_rate(dev)));printf("MPLL Speed: %lu MHz\n", F_MHZ(clk_get_periph_rate(dev, MPLL)));for (i = PB1CLK; i <= PB7CLK; i++)printf("PB%d Clock Speed: %lu MHz\n",i - PB1CLK + 1, F_MHZ(clk_get_periph_rate(dev, i)));for (i = REF1CLK; i <= REF5CLK; i++)printf("REFO%d Clock Speed: %lu MHz\n", i - REF1CLK + 1,F_MHZ(clk_get_periph_rate(dev, i)));+#undef F_MHZ return 0; } +#endif diff --git a/arch/mips/mach-pic32/include/mach/pic32.h b/arch/mips/mach-pic32/include/mach/pic32.h index f618697..8d4b275 100644 --- a/arch/mips/mach-pic32/include/mach/pic32.h +++ b/arch/mips/mach-pic32/include/mach/pic32.h @@ -76,4 +76,7 @@ static inline void __iomem *pic32_ioremap(phys_addr_t addr) return (void __iomem *)CKSEG1ADDR(addr); }
+/* Core */ +const char *get_core_name(void);
#endif /* __PIC32_REGS_H__ */ diff --git a/arch/mips/mach-pic32/lowlevel_init.S b/arch/mips/mach-pic32/lowlevel_init.S new file mode 100644 index 0000000..bff5553 --- /dev/null +++ b/arch/mips/mach-pic32/lowlevel_init.S @@ -0,0 +1,27 @@ +/*
- (c) 2015 Purna Chandra Mandal purna.mandal@microchip.com
- SPDX-License-Identifier: GPL-2.0+
+*/
+#include <config.h> +#include <asm/regdef.h> +#include <asm/mipsregs.h> +#include <asm/asm.h>
+LEAF(lowlevel_init)
/** Establish Cause* (set IV bit)*/li t1, 0x00800000mtc0 t1, CP0_CAUSE/* Establish Wired (and Random) */mtc0 zero, CP0_WIREDnopjr ranopplease indent instructions in a delay slot with an extra space character. That is convention for U-Boot MIPS assemby code.
ack.
END(lowlevel_init)diff --git a/arch/mips/mach-pic32/reset.c b/arch/mips/mach-pic32/reset.c new file mode 100644 index 0000000..70467cb --- /dev/null +++ b/arch/mips/mach-pic32/reset.c @@ -0,0 +1,36 @@ +/*
- (c) 2015 Purna Chandra Mandal purna.mandal@microchip.com
- SPDX-License-Identifier: GPL-2.0+
- */
+#include <common.h> +#include <asm/io.h> +#include <mach/pic32.h>
+#define SYSKEY 0x0030 +#define UNLOCK_KEY1 0xaa996655 +#define UNLOCK_KEY2 0x556699aa +#define LOCK_KEY 0
+#define RSWRST 0x1250
+void _machine_restart(void) +{
void __iomem *base;base = pic32_ioremap(PIC32_CFG_BASE);/* unlock sequence */writel(LOCK_KEY, base + SYSKEY);writel(UNLOCK_KEY1, base + SYSKEY);writel(UNLOCK_KEY2, base + SYSKEY);/* soft reset */writel(0x1, base + RSWRST);(void) readl(base + RSWRST);while (1);+}
1.8.3.1