Add the required pinctrl and gpio properties needed by the USB DT nodes of the sam9x60_curiosity boards.
Signed-off-by: Sergiu Moga sergiu.moga@microchip.com ---
v1 -> v2: - this patch was not here, previously split from 1/6 of v1
arch/arm/dts/at91-sam9x60_curiosity.dts | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
diff --git a/arch/arm/dts/at91-sam9x60_curiosity.dts b/arch/arm/dts/at91-sam9x60_curiosity.dts index 7c5b6ae2b8..d6ae3d648d 100644 --- a/arch/arm/dts/at91-sam9x60_curiosity.dts +++ b/arch/arm/dts/at91-sam9x60_curiosity.dts @@ -49,6 +49,13 @@ atmel,pins = <AT91_PIOD 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; }; + + usb1 { + pinctrl_usb_default: usb_default { + atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE + AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>; + }; + }; }; }; }; @@ -89,3 +96,17 @@ phy-mode = "rmii"; status = "okay"; }; + +&usb1 { + num-ports = <3>; + atmel,vbus-gpio = <0 + &pioD 15 GPIO_ACTIVE_HIGH + &pioD 18 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_default>; + status = "okay"; +}; + +&usb2 { + status = "okay"; +};