Hello Igor,
On 09.02.21 12:52, Igor Opaniuk wrote:
From: Igor Opaniuk igor.opaniuk@foundries.io
At present if U-Boot proper uses driver model for I2C, then SPL has to also. While this is desirable, it places a significant barrier to moving to driver model in some cases. For example, with a space-constrained SPL it may be necessary to enable CONFIG_SPL_OF_PLATDATA which involves adjusting some drivers.
This patch introduces a separate Kconfig symbols for enabling DM_I2C and DM_I2C_GPIO support in SPL.
This will also help to get away from dirty workarounds to achieve non-DM I2C support for SPL, which is currently used in some board header files like:
ifdef CONFIG_SPL_BUILD undef CONFIG_DM_I2C endif
Reviewed-by: Simon Glass sjg@chromium.org Reviewed-by: Heiko Schocher hs@denx.de Signed-off-by: Igor Opaniuk igor.opaniuk@foundries.io
(no changes since v2)
Changes in v2:
- R-b tags applied (Simon and Heiko)
drivers/i2c/Kconfig | 21 +++++++++++++++++++++ drivers/i2c/Makefile | 4 ++-- drivers/misc/Makefile | 2 +- 3 files changed, 24 insertions(+), 3 deletions(-)
Applied to u-boot-i2c.git master
Thanks!
bye, Heiko