Hi ,
I am trying to make a eval board from TI to boot it with the new FIT image format.
I have followed the below procedure but iam getting the "No valid FDT found - please append one to U-Boot binary, use u-boot-dtb.bin or define CONFIG_OF_EMBED." error message. Cannot find out what is the exact problem.
U-Boot Source:
The latest source code from denx.
patman: Suppress duplicate signoffs only for real patches on 05/17/2014
Procedure:
Followed the exact same process mentioned in
http://www.denx.de/wiki/pub/U-Boot/MiniSummitELCE2013/U-Boot_verified_RSA_bo...
I created a device tree and was able to generate a u-boot-dtb.bin file.
SD CARD:
1) copied the MLO in /boot
2) copied the u-boot-dtb.bin in /boot
3) coped the kernel_fdt.itb file
4) uEnv has
console=ttyO0,115200n8 fitfdt=/boot/kernel_fdt.itb setenv loadaddr 0x82000000; run mmcargs; ext2load mmc ${mmcdev}:2 ${loadaddr} ${fitfdt};
I loaded the u-boot-dtb.bin file but it still complains ! Not much help form the forums/internet
Please let me know if i missed anything here.
Thanks,
Harsha