The current dm9000x driver accesses its memory mapped registers directly instead of using the standard I/O accessors. This can cause problems on Blackfin systems as the accesses can get out of order. So convert the direct volatile dereferences to use the normal in/out macros.
Signed-off-by: Mike Frysinger vapier@gentoo.org Tested-by: Hoan Hoang hnhoan@i-syst.com --- v2 - use read/write rather than in/out per recent discussions (see dm9000)
drivers/net/ax88180.h | 15 ++++++++------- 1 files changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ax88180.h b/drivers/net/ax88180.h index 9a324bd..daf18e0 100644 --- a/drivers/net/ax88180.h +++ b/drivers/net/ax88180.h @@ -19,6 +19,7 @@ #ifndef _AX88180_H_ #define _AX88180_H_
+#include <asm/io.h> #include <asm/types.h> #include <config.h>
@@ -354,7 +355,7 @@ struct ax88180_private {
static inline unsigned short INW (struct eth_device *dev, unsigned long addr) { - return le16_to_cpu (*(volatile unsigned short *) (addr + dev->iobase)); + return le16_to_cpu(readw(addr + (void *)dev->iobase)); }
/* @@ -363,32 +364,32 @@ static inline unsigned short INW (struct eth_device *dev, unsigned long addr) #if defined (CONFIG_DRIVER_AX88180_16BIT) static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) { - *(volatile unsigned short *) ((addr + dev->iobase)) = cpu_to_le16 (command); + writew(cpu_to_le16(command), addr + (void *)dev->iobase); }
static inline unsigned short READ_RXBUF (struct eth_device *dev) { - return le16_to_cpu (*(volatile unsigned short *) (RXBUFFER_START + dev->iobase)); + return le16_to_cpu(readw(RXBUFFER_START + (void *)dev->iobase)); }
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned short data) { - *(volatile unsigned short *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le16 (data); + writew(cpu_to_le16(data), TXBUFFER_START + (void *)dev->iobase); } #else static inline void OUTW (struct eth_device *dev, unsigned short command, unsigned long addr) { - *(volatile unsigned long *) ((addr + dev->iobase)) = cpu_to_le32 (command); + writel(cpu_to_le32(command), addr + (void *)dev->iobase); }
static inline unsigned long READ_RXBUF (struct eth_device *dev) { - return le32_to_cpu (*(volatile unsigned long *) (RXBUFFER_START + dev->iobase)); + return le32_to_cpu(readl(RXBUFFER_START + (void *)dev->iobase)); }
static inline void WRITE_TXBUF (struct eth_device *dev, unsigned long data) { - *(volatile unsigned long *) ((TXBUFFER_START + dev->iobase)) = cpu_to_le32 (data); + writel(cpu_to_le32(data), TXBUFFER_START + (void *)dev->iobase); } #endif