22 Jan
2015
22 Jan
'15
1:42 p.m.
Hi Graeme,
On Wed, Jan 21, 2015 at 9:55 AM, Graeme Russ gruss@tss-engineering.com wrote:
Section 4.1.2 of Freescale Application Note AN4199 describes the configuration required to operate the mx28 from a 5V source without a battery. This patch implements the changes to the Freescale bootlets which allow this configuration to properly boot the mx28 processor
Signed-off-by: Graeme Russ gruss@tss-engineering.com
arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 190 +++++++++++++++++++++++++++- doc/README.mxs | 10 ++
Damien posted today a new version of this patch in the imx community, which is a lot simpler.
Could you please try it?
Thanks