Hi Anand,
Hi Lukasz,
On 26 July 2018 at 03:55, Lukasz Majewski lukma@denx.de wrote:
This commit allows by default booting Odroid XU3 from the SD card (when e.g. eMMC module is not present).
Signed-off-by: Lukasz Majewski lukma@denx.de
include/configs/odroid_xu3.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index f495f6219ba9..818a06515cb2 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -94,6 +94,9 @@ #undef CONFIG_SYS_BOARD #define CONFIG_SYS_BOARD "odroid"
+#undef CONFIG_SYS_MMC_ENV_DEV +#define CONFIG_SYS_MMC_ENV_DEV 2
/* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -105,8 +108,8 @@ "console=" CONFIG_DEFAULT_CONSOLE "\0"\ "fdtfile=exynos5422-odroidxu3.dtb\0" \ "boardname=odroidxu3\0" \
"mmcbootdev=0\0" \"mmcrootdev=0\0" \
"mmcbootdev=2\0" \"mmcrootdev=1\0" \ "mmcbootpart=1\0" \ "mmcrootpart=2\0" \ "dfu_alt_system="CONFIG_DFU_ALT_SYSTEM \-- 2.11.0
This changes probably breaks the booting from eMMC on Odroid-XU4
I suppose, that XU4 is also equipped with SD card slot as XU3.
Nonetheless, as I don't have eMMC card for mine XU3, the only way to boot my device is SD card.
If you believe that this may be a problem, then I can drop this patch.
Have you checked patches from 1-8? Does it work for you? If yes, please send tested-by tag.
U-Boot 2018.07-00377-g80df37b417 (Jul 26 2018 - 10:50:16 +0000) for ODROID-XU3/XU4/HC1
CPU: Exynos5422 @ 800 MHz Model: Odroid XU3 based on EXYNOS5422 Board: Odroid XU3 based on EXYNOS5422 Type: xu4 DRAM: 2 GiB MMC: EXYNOS DWMMC: 0, EXYNOS DWMMC: 2 Loading Environment from MMC... Card did not respond to voltage select! *** Warning - No block device, using default environment
Failed (-5) In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 0 MMC Device 1 not found no mmc device at slot 1 switch to partitions #0, OK mmc0(part 0) is current device Scanning mmc 0:1... Found U-Boot script /boot.scr 3069 bytes read in 6 ms (499 KiB/s) ## Executing script at 50000000 Card did not respond to voltage select! ** Bad device mmc 2 ** Card did not respond to voltage select! ** Bad device mmc 2 ** Card did not respond to voltage select! ** Bad device mmc 2 ** SCRIPT FAILED: continuing... 63776 bytes read in 7 ms (8.7 MiB/s) Card did not respond to voltage select! starting USB... USB0: USB EHCI 1.00 USB1: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 USB2: Register 2000140 NbrPorts 2 Starting the controller USB XHCI 1.00 scanning bus 0 for devices... 1 USB Device(s) found scanning bus 1 for devices... 3 USB Device(s) found scanning bus 2 for devices... 2 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found Waiting for Ethernet connection... done. BOOTP broadcast 1 BOOTP broadcast 2 DHCP client bound to address 10.0.0.144 (1021 ms) *** Warning: no boot file name; using '0A000090.img' Using r8152#0 device TFTP from server 0.0.0.0; our IP address is 10.0.0.144; sending through gateway 10.0.0.1 Filename '0A000090.img'. Load address: 0x43e00000 Loading: T
Best Regards -Anand
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de