Dear Alexander Holler,
In message 4CCADC10.9010205@ahsoftware.de you wrote:
...
U-Boot code: 00700000 -> 0075A210 BSS: -> 007A0300 SoC: Kirkwood 88F6281_A0 monitor len: 000A0300 ramsize: 08000000
That's 128 MB...
TLB table at: 07ff0000 Top of RAM usable for U-Boot at: 07ff0000 Reserving 640k for U-Boot at: 07f4f000 Reserving 1152k for malloc() at: 07e2f000 Reserving 48 Bytes for Board Info at: 07e2efd0 Reserving 92 Bytes for Global Data at: 07e2ef74 New Stack Pointer is: 07e2ef70 RAM Configuration: Bank #0: 00000000 128 MiB Bank #1: 00000000 0 Bytes
These look OK.
Bank #2: e7dfe27e 4 GiB Bank #3: 7fdbe1ce 2.7 GiB
But this is obviously garbage. And the printed sizes are garbage, too.
Where is this coming from?
Bank #0: 00000000 128 MiB Bank #1: 00000000 0 Bytes Bank #2: 0197f8ff 3.3 GiB Bank #3: 0f0c0cab 3.5 GiB
It seems you cannot even print sane numbers.
Did you verify that your inital stack is properly aligned?
Best regards,
Wolfgang Denk