On 14:20 Tue 22 Jul , Remy Bohmer wrote:
If CONFIG_SKIP_RELOCATE_UBOOT is set the flag GD_FLG_RELOC is usually never set, because relocation to RAM is actually never done by U-boot itself. However, several pieces of code check if this flag is set at some time.
So, to make sure this flag is set on boards skipping relocation, this is added to the initialisation of U-boot at a moment where it is safe to do so.
Signed-off-by: Remy Bohmer linux@bohmer.net
lib_arm/board.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
Index: u-boot-git-almost-1.3.4/lib_arm/board.c
--- u-boot-git-almost-1.3.4.orig/lib_arm/board.c 2008-07-21 11:53:23.000000000 +0200 +++ u-boot-git-almost-1.3.4/lib_arm/board.c 2008-07-21 12:25:32.000000000 +0200 @@ -233,6 +233,17 @@ static int init_func_i2c (void) } #endif
+#ifdef CONFIG_SKIP_RELOCATE_UBOOT +/*
- This routine sets the relocation done flag, because even if
- relocation is skipped, the flag is used by other generic code.
- */
+static int reloc_init(void) +{
- gd->flags |= GD_FLG_RELOC;
you need to return 0 at least
+} +#endif
/*
- Breathe some life into the board...
@@ -262,6 +273,11 @@ int print_cpuinfo (void); /* test-only *
init_fnc_t *init_sequence[] = { cpu_init, /* basic cpu dependent setup */ +#if defined(CONFIG_SKIP_RELOCATE_UBOOT)
- reloc_init, /* Set the relocation done flag, must
do this AFTER cpu_init(), but as soonas possible */+#endif board_init, /* basic board dependent setup */ interrupt_init, /* set up exceptions */ env_init, /* initialize environment */
Best Regards, J.