Hi Philipp:
On 2017年07月19日 04:36, Philipp Tomsich wrote:
For full SPL support, including DRAM initialisation, we need a few nodes from the DTS: this commit adds the DMC (DRAM controller) node, the service_msch (memory scheduler) node and marks GRF, PMUGRF and CRU as 'u-boot,dm-pre-reloc'. In addition to this, we also include the dt-binding for the DMC to allow DTS files including this DTSI to refer to the symbolic constants for the DDR3 bin and for the memory-schedule.
Note that the DMC contains both the memory regions for the (Designware) protocol controller as well as the DDR PHY.
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com
arch/arm/dts/rk3368.dtsi | 26 ++++++++++++++++++++------ 1 file changed, 20 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/rk3368.dtsi b/arch/arm/dts/rk3368.dtsi index 9daf765..8dd6549 100644 --- a/arch/arm/dts/rk3368.dtsi +++ b/arch/arm/dts/rk3368.dtsi @@ -46,6 +46,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/pinctrl/rockchip.h> #include <dt-bindings/thermal/thermal.h> +#include <dt-bindings/memory/rk3368-dmc.h>
/ { compatible = "rockchip,rk3368"; @@ -227,6 +228,23 @@ #clock-cells = <0>; };
- dmc: dmc@ff610000 {
u-boot,dm-pre-reloc;compatible = "rockchip,rk3368-dmc", "syscon";rockchip,cru = <&cru>;rockchip,grf = <&grf>;rockchip,msch = <&service_msch>;reg = <0 0xff610000 0 0x4000 0xff620000 0 0x400>;- };
- service_msch: syscon@ffac0000 {
u-boot,dm-pre-reloc;compatible = "rockchip,rk3368-msch", "syscon";reg = <0x0 0xffac0000 0x0 0x2000>;status = "okay";- };
- sdmmc: dwmmc@ff0c0000 { compatible = "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff0c0000 0x0 0x4000>;
@@ -546,12 +564,6 @@ status = "disabled"; };
- dmc: dmc@ff610000 {
u-boot,dm-pre-reloc;compatible = "rockchip,rk3368-dmc", "syscon";reg = <0x0 0xff610000 0x0 0x1000>;- };
- i2c0: i2c@ff650000 { compatible = "rockchip,rk3368-i2c", "rockchip,rk3288-i2c"; reg = <0x0 0xff650000 0x0 0x1000>;
@@ -653,6 +665,7 @@ };
cru: clock-controller@ff760000 {
u-boot,dm-pre-reloc;
As U-BOOT has introduced xxx-u-boot.dtsi for the U-BOOT-spceific dt information. I think it's better to put this u-boot needed things in rk3368-u-boot.dtsi. It will make things easier when we need to sync the dts with upstream kernel.
compatible = "rockchip,rk3368-cru"; reg = <0x0 0xff760000 0x0 0x1000>; rockchip,grf = <&grf>;@@ -661,6 +674,7 @@ };
grf: syscon@ff770000 {
u-boot,dm-pre-reloc;