On 23.10.24 05:39, Simon Glass wrote:
Hi Jan,
On Tue, 22 Oct 2024 at 21:59, Jan Kiszka jan.kiszka@siemens.com wrote:
On 22.10.24 19:00, Simon Glass wrote:
On Tue, 22 Oct 2024 at 08:06, Jan Kiszka jan.kiszka@siemens.com wrote:
From: Li Hua Qian huaqian.li@siemens.com
This brings a sysinfo driver and DT entry for the IOT2050 board series. It translates the board information passed from SE-Boot to SPL into values that can be retrieved via the sysinfo API. Will is already used to fill the SMBIOS table when booting via EFI.
Signed-off-by: Li Hua Qian huaqian.li@siemens.com [Jan: split-off as separate patch, cleanup] Signed-off-by: Jan Kiszka jan.kiszka@siemens.com
.../dts/k3-am65-iot2050-common-u-boot.dtsi | 18 +++ configs/iot2050_defconfig | 1 + drivers/sysinfo/Kconfig | 7 + drivers/sysinfo/Makefile | 1 + drivers/sysinfo/iot2050.c | 143 ++++++++++++++++++ drivers/sysinfo/iot2050.h | 26 ++++ 6 files changed, 196 insertions(+) create mode 100644 drivers/sysinfo/iot2050.c create mode 100644 drivers/sysinfo/iot2050.h
I think strlcpy() might be better than strncpy() for this case
Ack.
The idea with sysinfo is that we use the same enum for all boards, so please add your new things to sysinfo.h
See below.
Do you actually want all the sysinfo info in capitals? If so, that's fine, just checking...
This is how it is being shipped already, yes.
diff --git a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi index b6d2c816acc..55337179f9f 100644 --- a/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi +++ b/arch/arm/dts/k3-am65-iot2050-common-u-boot.dtsi @@ -14,6 +14,24 @@ spi0 = &ospi0; };
sysinfo {compatible = "siemens,sysinfo-iot2050";/* TI_SRAM_SCRATCH_BOARD_EEPROM_START */offset = <0x40280000>;bootph-all;smbios {system {manufacturer = "SIEMENS AG";product = "SIMATIC IOT2050";};baseboard {manufacturer = "SIEMENS AG";};};};leds { bootph-all; status-led-red {diff --git a/configs/iot2050_defconfig b/configs/iot2050_defconfig index 2624f0cb573..574e232d119 100644 --- a/configs/iot2050_defconfig +++ b/configs/iot2050_defconfig @@ -141,6 +141,7 @@ CONFIG_SOC_TI=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_CADENCE_QSPI=y +CONFIG_SYSINFO=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y CONFIG_SYSRESET_TI_SCI=y diff --git a/drivers/sysinfo/Kconfig b/drivers/sysinfo/Kconfig index 2030e4babc9..df83df69ffb 100644 --- a/drivers/sysinfo/Kconfig +++ b/drivers/sysinfo/Kconfig @@ -31,6 +31,13 @@ config SYSINFO_RCAR3 help Support querying SoC version information for Renesas R-Car Gen3.
+config SYSINFO_IOT2050
bool "Enable sysinfo driver for the Siemens IOT2050"depends on TARGET_IOT2050_A53default y if TARGET_IOT2050_A53helpSupport querying device information for Siemens IOT2050.config SYSINFO_SANDBOX bool "Enable sysinfo driver for the Sandbox board" help diff --git a/drivers/sysinfo/Makefile b/drivers/sysinfo/Makefile index 680dde77fe8..26ca3150999 100644 --- a/drivers/sysinfo/Makefile +++ b/drivers/sysinfo/Makefile @@ -5,6 +5,7 @@ obj-y += sysinfo-uclass.o obj-$(CONFIG_SYSINFO_GAZERBEAM) += gazerbeam.o obj-$(CONFIG_SYSINFO_GPIO) += gpio.o +obj-$(CONFIG_SYSINFO_IOT2050) += iot2050.o obj-$(CONFIG_SYSINFO_RCAR3) += rcar3.o obj-$(CONFIG_SYSINFO_SANDBOX) += sandbox.o obj-$(CONFIG_SYSINFO_SMBIOS) += smbios.o diff --git a/drivers/sysinfo/iot2050.c b/drivers/sysinfo/iot2050.c new file mode 100644 index 00000000000..5359d6b8d62 --- /dev/null +++ b/drivers/sysinfo/iot2050.c @@ -0,0 +1,143 @@ +// SPDX-License-Identifier: GPL-2.0 +/*
- Copyright (c) Siemens AG, 2024
- */
+#include <dm.h> +#include <sysinfo.h> +#include <net.h> +#include <asm/arch/hardware.h>
+#include "iot2050.h"
+#define IOT2050_INFO_MAGIC 0x20502050
+struct iot2050_info {
u32 magic;u16 size;char name[20 + 1];char serial[16 + 1];char mlfb[18 + 1];char uuid[32 + 1];char a5e[18 + 1];u8 mac_addr_cnt;u8 mac_addr[8][ARP_HLEN];char seboot_version[40 + 1];u8 padding[3];u32 ddr_size_mb;+} __packed;
+/**
- struct sysinfo_iot2050_priv - sysinfo private data
- @info: iot2050 board info
- */
+struct sysinfo_iot2050_priv {
struct iot2050_info *info;+};
+static int sysinfo_iot2050_detect(struct udevice *dev) +{
struct sysinfo_iot2050_priv *priv = dev_get_priv(dev);if (priv->info == NULL || priv->info->magic != IOT2050_INFO_MAGIC)return -EFAULT;return 0;+}
+static int sysinfo_iot2050_get_str(struct udevice *dev, int id, size_t size,
char *val)+{
struct sysinfo_iot2050_priv *priv = dev_get_priv(dev);char byte_str[3] = {0};unsigned int n;switch (id) {case BOARD_NAME:strncpy(val, priv->info->name, size);break;case BOARD_SERIAL:strncpy(val, priv->info->serial, size);break;case BOARD_MLFB:strncpy(val, priv->info->mlfb, size);break;case BOARD_UUID:for (n = 0; n < min(size, (size_t)16); n++) {memcpy(byte_str, priv->info->uuid + n * 2, 2);val[n] = (char)hextoul(byte_str, NULL);}break;case BOARD_A5E:strncpy(val, priv->info->a5e, size);break;case BOARD_SEBOOT_VER:strncpy(val, priv->info->seboot_version, size);break;case BOARD_MAC_ADDR_1:case BOARD_MAC_ADDR_2:case BOARD_MAC_ADDR_3:case BOARD_MAC_ADDR_4:case BOARD_MAC_ADDR_5:case BOARD_MAC_ADDR_6:case BOARD_MAC_ADDR_7:case BOARD_MAC_ADDR_8:memcpy(val, priv->info->mac_addr[id - BOARD_MAC_ADDR_START],ARP_HLEN);For this, we really need another parameter to get_str(), i.e. the index, since we don't know how many MACs there will be. So how about adding a few new operations?
int (*get_item_count)(struct udevice *dev, int id); int (*get_str_item)(struct udevice *dev, int id, int index, size_t size, char *val);
Ok, makes sense.
return 0;case BOARD_DDR_SIZE:memcpy(val, &priv->info->ddr_size_mb,sizeof(priv->info->ddr_size_mb));return 0;default:return -EINVAL;};val[size - 1] = '\0';return 0;+}
+static int sysinfo_iot2050_get_int(struct udevice *dev, int id, int *val) +{
struct sysinfo_iot2050_priv *priv = dev_get_priv(dev);switch (id) {case BOARD_MAC_ADDR_CNT:*val = priv->info->mac_addr_cnt;return 0;default:return -EINVAL;};+}
+static const struct sysinfo_ops sysinfo_iot2050_ops = {
.detect = sysinfo_iot2050_detect,.get_str = sysinfo_iot2050_get_str,.get_int = sysinfo_iot2050_get_int,+};
+static int sysinfo_iot2050_probe(struct udevice *dev) +{
struct sysinfo_iot2050_priv *priv = dev_get_priv(dev);unsigned long offset;offset = dev_read_u32_default(dev, "offset",TI_SRAM_SCRATCH_BOARD_EEPROM_START);priv->info = (struct iot2050_info *)offset;return 0;+}
+static const struct udevice_id sysinfo_iot2050_ids[] = {
{ .compatible = "siemens,sysinfo-iot2050" },{ /* sentinel */ }+};
+U_BOOT_DRIVER(sysinfo_iot2050) = {
.name = "sysinfo_iot2050",.id = UCLASS_SYSINFO,.of_match = sysinfo_iot2050_ids,.ops = &sysinfo_iot2050_ops,.priv_auto = sizeof(struct sysinfo_iot2050_priv),.probe = sysinfo_iot2050_probe,+}; diff --git a/drivers/sysinfo/iot2050.h b/drivers/sysinfo/iot2050.h new file mode 100644 index 00000000000..f659a8282b5 --- /dev/null +++ b/drivers/sysinfo/iot2050.h @@ -0,0 +1,26 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/*
- Copyright (c) Siemens AG, 2024
- */
+#include <sysinfo.h>
+enum sysinfo_id_iot2050 {
BOARD_MLFB = SYSINFO_ID_SMBIOS_SYSTEM_VERSION,BOARD_SERIAL = SYSINFO_ID_SMBIOS_SYSTEM_SERIAL,BOARD_UUID = SYSINFO_ID_SMBIOS_SYSTEM_UUID,BOARD_A5E = SYSINFO_ID_SMBIOS_BASEBOARD_PRODUCT,BOARD_NAME = SYSINFO_ID_SMBIOS_BASEBOARD_VERSION,Do you need to rename these? It seems better to use the standard names, although I do think they are quite long.
We don't rename, we map pre-existing field names in EEPROM and pre-existing board-specific U-Boot env vars to sysinfo fields here.
Yes, that's what I mean. Can you just use the SYSINFO_ID... values directory, rather than creating mapping?
The mapping is unavoidable ("pre-existing"), and here is the most logical point for me as it avoids that we have to do it twice: first in the sysinfo driver (EEPROM->SYSINFO_ID) and then again in set_board_info_env (SYSINFO_ID->env-vars).
BOARD_SEBOOT_VER = SYSINFO_ID_USER + 0,BOARD_MAC_ADDR_CNT = SYSINFO_ID_USER + 1,BOARD_MAC_ADDR_1 = SYSINFO_ID_USER + 2,BOARD_MAC_ADDR_START = BOARD_MAC_ADDR_1,BOARD_MAC_ADDR_2 = SYSINFO_ID_USER + 3,BOARD_MAC_ADDR_3 = SYSINFO_ID_USER + 4,BOARD_MAC_ADDR_4 = SYSINFO_ID_USER + 5,BOARD_MAC_ADDR_5 = SYSINFO_ID_USER + 6,BOARD_MAC_ADDR_6 = SYSINFO_ID_USER + 7,BOARD_MAC_ADDR_7 = SYSINFO_ID_USER + 8,BOARD_MAC_ADDR_8 = SYSINFO_ID_USER + 9,BOARD_DDR_SIZE = SYSINFO_ID_USER + 10,These are the ones which should be added as standard. Be sure to comment them as necessary.
You mean that BOARD_MAC_ADDR and BOARD_DDR_SIZE should become SYSINFO_ID_BOARD_MAC_ADDR and SYSINFO_ID_BOARD_DDR_SIZE? But BOARD_SEBOOT_VER is nothing that has any meaning beyond our board.
For BOARD_SEBOOT_VER, I don't know what it is, but just add a comment and put it in sysinfo.h. It is OK to add board-specific stufff there.
This still makes no sense to me. What is the point of SYSINFO_ID_USER then? Why does it exists and is being used elsewhere when it shouldn't?
Is BOARD_DDR_SIZE the memory size? Perhaps rename it to RAM_SIZE ?
Yes, and I'm also considering to append "_MB" in order to clarify the unit.
Jan