This patch adds support for i.MX27-LITEKIT development board from LogicPD. This board uses i.MX27 SoC and has 2MB NOR flash, 64MB NAND flash, FEC ethernet controller integrated into i.MX27.
Signed-off-by: Ilya Yanok yanok@emcraft.com --- MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/logicpd/imx27lite/Makefile | 51 +++++++ board/logicpd/imx27lite/config.mk | 1 + board/logicpd/imx27lite/imx27lite.c | 97 +++++++++++++ board/logicpd/imx27lite/lowlevel_init.S | 223 +++++++++++++++++++++++++++++++ board/logicpd/imx27lite/u-boot.lds | 56 ++++++++ include/configs/imx27lite.h | 195 +++++++++++++++++++++++++++ 9 files changed, 628 insertions(+), 0 deletions(-) create mode 100644 board/logicpd/imx27lite/Makefile create mode 100644 board/logicpd/imx27lite/config.mk create mode 100644 board/logicpd/imx27lite/imx27lite.c create mode 100644 board/logicpd/imx27lite/lowlevel_init.S create mode 100644 board/logicpd/imx27lite/u-boot.lds create mode 100644 include/configs/imx27lite.h
diff --git a/MAINTAINERS b/MAINTAINERS index 3d50668..98efd69 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -519,6 +519,7 @@ George G. Davis gdavis@mvista.com gcplus SA1100
Wolfgang Denk wd@denx.de + imx27lite i.MX27 qong i.MX31
Thomas Elste info@elste.org diff --git a/MAKEALL b/MAKEALL index 57dd425..2aaec13 100755 --- a/MAKEALL +++ b/MAKEALL @@ -504,6 +504,7 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ + imx27lite \ lpd7a400 \ mx1ads \ mx1fs2 \ diff --git a/Makefile b/Makefile index 24e6410..cd02a36 100644 --- a/Makefile +++ b/Makefile @@ -2790,6 +2790,9 @@ davinci_sffsdr_config : unconfig davinci_sonata_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+imx27lite_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs imx27lite logicpd mx27 + lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x diff --git a/board/logicpd/imx27lite/Makefile b/board/logicpd/imx27lite/Makefile new file mode 100644 index 0000000..c404cef --- /dev/null +++ b/board/logicpd/imx27lite/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := imx27lite.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### + diff --git a/board/logicpd/imx27lite/config.mk b/board/logicpd/imx27lite/config.mk new file mode 100644 index 0000000..a2e7768 --- /dev/null +++ b/board/logicpd/imx27lite/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0xA7F00000 diff --git a/board/logicpd/imx27lite/imx27lite.c b/board/logicpd/imx27lite/imx27lite.c new file mode 100644 index 0000000..7c2658c --- /dev/null +++ b/board/logicpd/imx27lite/imx27lite.c @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2007 Sascha Hauer, Pengutronix + * Copyright (C) 2008,2009 Eric Jarrige jorasse@users.sourceforge.net + * Copyright (C) 2009 Ilya Yanok yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/arch/imx-regs.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int imx27lite_devices_init(void) +{ + int i; + unsigned int mode[] = { + PD0_AIN_FEC_TXD0, + PD1_AIN_FEC_TXD1, + PD2_AIN_FEC_TXD2, + PD3_AIN_FEC_TXD3, + PD4_AOUT_FEC_RX_ER, + PD5_AOUT_FEC_RXD1, + PD6_AOUT_FEC_RXD2, + PD7_AOUT_FEC_RXD3, + PD8_AF_FEC_MDIO, + PD9_AIN_FEC_MDC | GPIO_PUEN, + PD10_AOUT_FEC_CRS, + PD11_AOUT_FEC_TX_CLK, + PD12_AOUT_FEC_RXD0, + PD13_AOUT_FEC_RX_DV, + PD14_AOUT_FEC_CLR, + PD15_AOUT_FEC_COL, + PD16_AIN_FEC_TX_ER, + PF23_AIN_FEC_TX_EN, + PE12_PF_UART1_TXD, + PE13_PF_UART1_RXD, + PB4_PF_SD2_D0, + PB5_PF_SD2_D1, + PB6_PF_SD2_D2, + PB7_PF_SD2_D3, + PB8_PF_SD2_CMD, + PB9_PF_SD2_CLK, + }; + + for (i = 0; i < ARRAY_SIZE(mode); i++) + imx_gpio_mode(mode[i]); + + return 0; +} + +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_IMX27LITE; + gd->bd->bi_boot_params = 0xa0000100; + + imx27lite_devices_init(); + + return 0; +} + +int dram_init (void) +{ + +#if ( CONFIG_NR_DRAM_BANKS > 0 ) + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((volatile void *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); +#endif +#if ( CONFIG_NR_DRAM_BANKS > 1 ) + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size((volatile void *)PHYS_SDRAM_2, + PHYS_SDRAM_2_SIZE); +#endif + + return 0; +} + +int checkboard(void) +{ + printf("LogicPD imx27lite\n"); + return 0; +} diff --git a/board/logicpd/imx27lite/lowlevel_init.S b/board/logicpd/imx27lite/lowlevel_init.S new file mode 100644 index 0000000..ba02ad4 --- /dev/null +++ b/board/logicpd/imx27lite/lowlevel_init.S @@ -0,0 +1,223 @@ +/* + * For clock initialization, see chapter 3 of the "MCIMX27 Multimedia + * Applications Processor Reference Manual, Rev. 0.2". + * + * (C) Copyright 2008 Eric Jarrige eric.jarrige@armadeus.org + * (C) Copyright 2009 Ilya Yanok yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <config.h> +#include <version.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/asm-offsets.h> + +#define SDRAM_ESDCFG_REGISTER_VAL(cas) \ + (ESDCFG_TRC(10) | \ + ESDCFG_TRCD(3) | \ + ESDCFG_TCAS(cas) | \ + ESDCFG_TRRD(1) | \ + ESDCFG_TRAS(5) | \ + ESDCFG_TWR | \ + ESDCFG_TMRD(2) | \ + ESDCFG_TRP(2) | \ + ESDCFG_TXP(3)) + +#define SDRAM_ESDCTL_REGISTER_VAL \ + (ESDCTL_PRCT(0) | \ + ESDCTL_BL | \ + ESDCTL_PWDT(0) | \ + ESDCTL_SREFR(3) | \ + ESDCTL_DSIZ_32 | \ + ESDCTL_COL10 | \ + ESDCTL_ROW13 | \ + ESDCTL_SDE) + +#define SDRAM_ALL_VAL 0xf00 + +#define SDRAM_MODE_REGISTER_VAL 0x33 /* BL: 8, CAS: 3 */ +#define SDRAM_EXT_MODE_REGISTER_VAL 0x1000000 + +#define MPCTL0_VAL 0x1ef15d5 + +#define SPCTL0_VAL 0x043a1c09 + +#define CSCR_VAL 0x33f08107 + +#define PCDR0_VAL 0x120470c3 +#define PCDR1_VAL 0x03030303 +#define PCCR0_VAL 0xffffffff +#define PCCR1_VAL 0xfffffffc + +#define AIPI1_PSR0_VAL 0x20040304 +#define AIPI1_PSR1_VAL 0xdffbfcfb +#define AIPI2_PSR0_VAL 0x07ffc200 +#define AIPI2_PSR1_VAL 0xffffffff + +#define writel(reg, val) \ + ldr r0, =reg; \ + ldr r1, =val; \ + str r1, [r0]; + +SOC_ESDCTL_BASE_W: .word IMX_ESD_BASE +SOC_SI_ID_REG_W: .word IMX_SYSTEM_CTL_BASE +SDRAM_ESDCFG_T1_W: .word SDRAM_ESDCFG_REGISTER_VAL(0) +SDRAM_ESDCFG_T2_W: .word SDRAM_ESDCFG_REGISTER_VAL(3) +SDRAM_PRECHARGE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_PRECHARGE | \ + ESDCTL_ROW13 | ESDCTL_COL10) +SDRAM_AUTOREF_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_AUTO_REF | \ + ESDCTL_ROW13 | ESDCTL_COL10) +SDRAM_LOADMODE_CMD_W: .word (ESDCTL_SDE | ESDCTL_SMODE_LOAD_MODE | \ + ESDCTL_ROW13 | ESDCTL_COL10) +SDRAM_NORMAL_CMD_W: .word SDRAM_ESDCTL_REGISTER_VAL + + .macro init_aipi + /* + * setup AIPI1 and AIPI2 + */ + writel(AIPI1_PSR0, AIPI1_PSR0_VAL) + writel(AIPI1_PSR1, AIPI1_PSR1_VAL) + writel(AIPI2_PSR0, AIPI2_PSR0_VAL) + writel(AIPI2_PSR1, AIPI2_PSR1_VAL) + + .endm /* init_aipi */ + + .macro init_clock + ldr r0, =CSCR + /* disable MPLL/SPLL first */ + ldr r1, [r0] + bic r1, r1, #(CSCR_MPEN|CSCR_SPEN) + str r1, [r0] + + writel(MPCTL0, MPCTL0_VAL) + writel(SPCTL0, SPCTL0_VAL) + + writel(CSCR, CSCR_VAL | CSCR_MPLL_RESTART | CSCR_SPLL_RESTART) + + /* + * add some delay here + */ + mov r1, #0x1000 +1: subs r1, r1, #0x1 + bne 1b + + /* peripheral clock divider */ + writel(PCDR0, PCDR0_VAL) + writel(PCDR1, PCDR1_VAL) + + /* Configure PCCR0 and PCCR1 */ + writel(PCCR0, PCCR0_VAL) + writel(PCCR1, PCCR1_VAL) + + .endm /* init_clock */ + + .macro sdram_init + ldr r0, SOC_ESDCTL_BASE_W + mov r2, #PHYS_SDRAM_1 + + /* Do initial reset */ + mov r1, #ESDMISC_MDDR_DL_RST + str r1, [r0, #ESDMISC_ROF] + + /* Hold for more than 200ns */ + ldr r1, =0x10000 +1: + subs r1, r1, #0x1 + bne 1b + + /* Activate LPDDR iface */ + mov r1, #ESDMISC_MDDREN + str r1, [r0, #ESDMISC_ROF] + + /* Check The chip version TO1 or TO2 */ + ldr r1, SOC_SI_ID_REG_W + ldr r1, [r1] + ands r1, r1, #0xF0000000 + /* add Latency on CAS only for TO2 */ + ldreq r1, SDRAM_ESDCFG_T2_W + ldrne r1, SDRAM_ESDCFG_T1_W + str r1, [r0, #ESDCFG0_ROF] + + /* Run initialization sequence */ + ldr r1, SDRAM_PRECHARGE_CMD_W + str r1, [r0, #ESDCTL0_ROF] + ldr r1, [r2, #SDRAM_ALL_VAL] + + ldr r1, SDRAM_AUTOREF_CMD_W + str r1, [r0, #ESDCTL0_ROF] + ldr r1, [r2, #SDRAM_ALL_VAL] + ldr r1, [r2, #SDRAM_ALL_VAL] + + ldr r1, SDRAM_LOADMODE_CMD_W + str r1, [r0, #ESDCTL0_ROF] + ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] + add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL + ldrb r1, [r3] + + ldr r1, SDRAM_NORMAL_CMD_W + str r1, [r0, #ESDCTL0_ROF] + +#if (CONFIG_NR_DRAM_BANKS > 1) + /* 2nd sdram */ + mov r2, #PHYS_SDRAM_2 + + /* Check The chip version TO1 or TO2 */ + ldr r1, SOC_SI_ID_REG_W + ldr r1, [r1] + ands r1, r1, #0xF0000000 + /* add Latency on CAS only for TO2 */ + ldreq r1, SDRAM_ESDCFG_T2_W + ldrne r1, SDRAM_ESDCFG_T1_W + str r1, [r0, #ESDCFG1_ROF] + + /* Run initialization sequence */ + ldr r1, SDRAM_PRECHARGE_CMD_W + str r1, [r0, #ESDCTL1_ROF] + ldr r1, [r2, #SDRAM_ALL_VAL] + + ldr r1, SDRAM_AUTOREF_CMD_W + str r1, [r0, #ESDCTL1_ROF] + ldr r1, [r2, #SDRAM_ALL_VAL] + ldr r1, [r2, #SDRAM_ALL_VAL] + + ldr r1, SDRAM_LOADMODE_CMD_W + str r1, [r0, #ESDCTL1_ROF] + ldrb r1, [r2, #SDRAM_MODE_REGISTER_VAL] + add r3, r2, #SDRAM_EXT_MODE_REGISTER_VAL + ldrb r1, [r3] + + ldr r1, SDRAM_NORMAL_CMD_W + str r1, [r0, #ESDCTL1_ROF] +#endif /* CONFIG_NR_DRAM_BANKS > 1 */ + + .endm /* sdram_init */ + + .globl board_init_lowlevel + board_init_lowlevel: + .globl lowlevel_init + lowlevel_init: + + mov r10, lr + + init_aipi + + init_clock + + sdram_init + + mov pc,r10 diff --git a/board/logicpd/imx27lite/u-boot.lds b/board/logicpd/imx27lite/u-boot.lds new file mode 100644 index 0000000..f66f20e --- /dev/null +++ b/board/logicpd/imx27lite/u-boot.lds @@ -0,0 +1,56 @@ +/* + * (C) Copyright 2007 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + cpu/arm926ejs/start.o (.text) + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} + diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h new file mode 100644 index 0000000..570a94d --- /dev/null +++ b/include/configs/imx27lite.h @@ -0,0 +1,195 @@ +/* + * Copyright (C) 2009 Ilya Yanok yanok@emcraft.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*===================*/ +/* SoC Configuration */ +/*===================*/ +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_MX27 +#define CONFIG_IMX27LITE +#define CONFIG_MX27_CLK32 32768 /* OSC32K frequency */ +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/*=============*/ +/* Memory Info */ +/*=============*/ +/* malloc() len */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 256*1024) +/* reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 +/* memtest start address */ +#define CONFIG_SYS_MEMTEST_START 0xA0000000 +#define CONFIG_SYS_MEMTEST_END 0xA1000000 /* 16MB RAM test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ +#define PHYS_SDRAM_1 0xA0000000 /* DDR Start */ +#define PHYS_SDRAM_1_SIZE 0x08000000 /* DDR size 128MB */ + +/*====================*/ +/* Serial Driver info */ +/*====================*/ +#define CONFIG_MXC_UART +#define CONFIG_SYS_MX27_UART1 +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*=====================*/ +/* Flash & Environment */ +/*=====================*/ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +/* Use buffered writes (~10x faster) */ +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +/* Use hardware sector protection */ +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CONFIG_SYS_FLASH_SECT_SZ 0x2000 /* 8KB sect size Intel Flash */ +/* end of flash */ +#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - 0x20000) +/* CS2 Base address */ +#define PHYS_FLASH_1 0xc0000000 +/* Flash Base for U-Boot */ +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +/* Flash size 2MB */ +#define PHYS_FLASH_SIZE 0x200000 +#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE / \ + CONFIG_SYS_FLASH_SECT_SZ) +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_MONITOR_LEN 0x40000 /* Reserve 256KiB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 /* Env sector Size */ +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* + * Ethernet + */ +#define CONFIG_FEC_IMX27 +#define CONFIG_MII +#define CONFIG_NET_MULTI + +/* + * NAND + */ +#define CONFIG_NAND_MXC +#define CONFIG_MXC_NAND_REGS_BASE 0xd8000000 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0xd8000000 +#define CONFIG_JFFS2_NAND +#define CONFIG_MXC_NAND_HWECC + +/* + * SD/MMC + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_MXC_MMC +#define CONFIG_MXC_MCI_REGS_BASE 0x10014000 +#define CONFIG_DOS_PARTITION + +/* + * MTD partitions + */ +#define CONFIG_CMD_MTDPARTS +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=mxc_nand.0" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:256k(U-Boot),1664k(user),64k(env1)," \ + "64k(env2);mxc_nand.0:128k(IPL-SPL),4m(kernel),22m(rootfs),-(userfs)" + +/*==============================*/ +/* U-Boot general configuration */ +/*==============================*/ +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print buffer sz */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP + +/*=================*/ +/* U-Boot commands */ +/*=================*/ +#include <config_cmd_default.h> +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_BDI +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_FAT +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + +#define CONFIG_BOOTDELAY 5 + +#define CONFIG_LOADADDR 0xa0800000 /* loadaddr env var */ +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define xstr(s) str(s) +#define str(s) #s + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs}" \ + " console=ttymxc0,${baudrate}\0" \ + "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ + "addmisc=setenv bootargs ${bootargs}\0" \ + "u-boot=imx27/u-boot.bin\0" \ + "kernel_addr_r=a0800000\0" \ + "hostname=imx27\0" \ + "bootfile=imx27/uImage\0" \ + "rootpath=/opt/eldk-4.2-arm/arm\0" \ + "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ + "run nfsargs addip addtty addmtd addmisc;" \ + "bootm\0" \ + "bootcmd=run net_nfs\0" \ + "load=tftp ${loadaddr} ${u-boot}\0" \ + "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};era " xstr(CONFIG_SYS_MONITOR_BASE) \ + " +${filesize};cp.b ${fileaddr} " \ + xstr(CONFIG_SYS_MONITOR_BASE) " ${filesize}\0" \ + "upd=run load update\0" \ + +#endif /* __CONFIG_H */